Aromatic Solvents

2-Ethylhexyl Acrylate

CAS No. 103-11-7

  • Quote within 4 working hours
  • Batch CoA supplied with every delivery
  • Redhills, Chennai warehouse

About this product

2-Ethylhexyl acrylate (2-EHA, CAS 103-11-7, HSN 2916 12 90) is an MEHQ-inhibited acrylate monomer that adhesive, coating and polymer manufacturers use as a soft, flexible comonomer. Supreme Petro Chemicals, a Chennai importer and bulk distributor, supplies the technical grade at 99.5% min purity by GC in drums, with the TDS and SDS available to download and a batch Certificate of Analysis supplied with every delivery.

Safety & Technical Documents

Technical data sheet (TDS) & Certificate of Analysis

Download TDSPDF

Batch Certificate of Analysis (CoA) · supplied with every delivery

Need another sheet? Browse the full SDS & TDS library — safety and technical data sheets for every product we supply.

2-Ethylhexyl Acrylate at a glance

Also known as
2-EHA · 2-ethyl hexyl acrylate · 2-ethylhexyl prop-2-enoate
CAS number
103-11-7
HSN code
2916 12 90

CAS number and formula checked against PubChem on 21 October 2026. Full grade and property values are in the specifications below. More lookups: chemical abbreviations list · CAS number reference.

Applications & Uses

Pressure-sensitive adhesives and tapes
Acrylic emulsion polymers and latexes
Paints, coatings and binders
Sealants and caulks
Textile and leather finishing polymers
Flexible comonomer in acrylic copolymers

Grades & Technical Specifications

Physical Properties

Appearance
Clear colourless liquid; colour 10 max (Pt-Co / APHA)
Purity
99.5% min (by GC)
Assay
99.5% min (GC)
Density
0.880 – 0.886 (specific gravity at 20°C)
Boiling Point
213 – 216°C (boiling range)

Supply & Packaging

Packaging
Drums
Grades Available
Inhibited monomer, technical grade

Compliance & Storage

HS Code
2916 12 90
Storage
Cool, below 25°C, away from heat, sparks and oxidisers. Keep an air headspace — the MEHQ inhibitor (15–20 ppm) needs oxygen; oxygen exclusion risks runaway polymerisation.

These specs are indicative. Request a Certificate of Analysis (COA) for batch-specific values.

What is 2-EHA? CAS, HSN code and identity

2-EHA is short for 2-ethylhexyl acrylate, the acrylic acid ester of 2-ethylhexanol: CAS 103-11-7, EC 203-080-7, HSN 2916 12 90. Supreme Petro Chemicals is a Chennai importer and bulk distributor, not a manufacturer. We supply it as an inhibited monomer, technical grade, at 99.5% min purity by GC, with a batch Certificate of Analysis supplied with every delivery.

2-Ethylhexyl acrylate (CAS 103-11-7) is a different chemical from 2-ethylhexyl acetate (CAS 103-09-3): the acrylate is a reactive monomer that polymerises, while the acetate is a non-reactive ester solvent. Check the CAS number on your requirement before ordering.

The tariff line for 2-EHA is 2916 12 90, esters of acrylic acid: other. There is no dedicated line for 2-EHA inside sub-heading 2916 12, so confirm the classification and any duty with your customs broker.

2-Ethylhexyl acrylate (2-EHA): identity at a glance
ItemDetail
Abbreviation2-EHA
Chemical familyAcrylic ester; acrylate monomer
IUPAC name2-ethylhexyl prop-2-enoate
CAS number103-11-7
EC number203-080-7
HSN code (India)2916 12 90 (esters of acrylic acid: other)
Grade suppliedInhibited monomer, technical grade; 99.5% min (GC)
InhibitorMEHQ, 15 to 20 ppm
Pack formatDrums
DocumentsTDS (SPC-TDS-ACR-001), SDS, batch Certificate of Analysis with every delivery
Source: Manufacturer's technical data sheet SPC-TDS-ACR-001; SPC safety data sheet; SPC tariff reference (verified HSN row)

2-EHA specification: purity, colour, water and MEHQ

The technical grade is specified at 99.5% min purity by GC, colour 10 max (Pt-Co), specific gravity 0.880 to 0.886 at 20 C, boiling range 213 to 216 C, water 0.05% max (Karl Fischer) and MEHQ inhibitor 15 to 20 ppm. These are the manufacturer's published limits. The batch Certificate of Analysis reports the results for the batch delivered.

This is a technical grade for industrial polymer, adhesive and coating use. It is not a food or pharma grade.

2-Ethylhexyl acrylate specification (technical grade, inhibited monomer)
ParameterUnitLimit
Purity (by GC)% min99.5
Appearance-Clear colourless liquid
Colour (APHA / Pt-Co)Pt-Co scale10 max
Specific gravity at 20 C-0.880 to 0.886
Boiling rangeC213 to 216
Water content (Karl Fischer)% max0.05
Acidity (as acrylic acid)% max0.01
Free acid% max0.01
Peroxides (as H2O2)ppm max10
MEHQ inhibitorppm15 to 20
Source: Manufacturer's published specification, TDS SPC-TDS-ACR-001

What is 2-EHA used for?

2-EHA is polymerised into acrylic copolymers, where it adds softness and flexibility to the finished polymer. SPC supplies it as a chemical for pressure-sensitive adhesive, acrylic emulsion, paint and coating, and sealant manufacturers.

  • Pressure-sensitive adhesives and tapes.
  • Acrylic emulsion polymers and latexes.
  • Paints, coatings and binders.
  • Sealants and caulks.
  • Textile and leather finishing polymers.

How is 2-EHA supplied from Chennai?

SPC supplies 2-EHA in drums, arranged from Chennai (warehouse: Redhills; head office: Periyamet) across South India. Tell us the quantity and pack you need and the pack format is confirmed in the quotation.

The monomer is made by an Indian producer; the maker is named on the TDS and on the batch Certificate of Analysis. SPC is an importer and trader, not the manufacturer.

Which documents come with 2-EHA?

The TDS and SDS can be downloaded from this page, and a batch Certificate of Analysis is supplied with every delivery. The TDS shows the manufacturer's limits; the Certificate of Analysis reports the batch delivered.

  • Technical Data Sheet (TDS), SPC-TDS-ACR-001.
  • Safety Data Sheet (SDS), current revision, downloadable from this page.
  • Batch Certificate of Analysis, supplied with every delivery: check purity, water, acidity and MEHQ against the TDS limits.
  • Scope: one technical grade (inhibited monomer). The documents do not cover a food or pharma grade.

How should 2-EHA be stored?

Store 2-EHA cool, below 25 C, away from heat, sparks and oxidisers, with the MEHQ inhibitor intact and an air headspace in the container. Do not store it oxygen-free: the TDS warns that oxygen exclusion risks runaway polymerisation. Read the SDS before handling; this page summarises it and does not replace it.

The SDS classifies it Flam. Liq. 4, Skin Irrit. 2, Skin Sens. 1, STOT SE 3 and Aquatic Chronic 2, signal word Warning. Wear chemical-resistant gloves and eye protection, use grounded equipment and avoid release to drains.

2-EHA safety and handling summary
ItemDetail
Signal wordWarning
FireH227: combustible liquid
SkinH315: causes skin irritation; H317: may cause an allergic skin reaction
RespiratoryH335: may cause respiratory irritation
EnvironmentH411: toxic to aquatic life with long lasting effects
Flash pointApprox. 75 to 82 C, closed cup (SDS literature value; not a TDS specification)
Storage temperatureBelow 25 C (TDS)
InhibitorMEHQ 15 to 20 ppm; keep an air headspace
Incompatible materialsStrong oxidisers, for example nitric acid, chlorine, permanganates and peroxides
Source: Safety data sheet (sections 2, 7, 9, 10) and TDS SPC-TDS-ACR-001 safety line

2-EHA vs 2-ethylhexyl acetate vs butyl acrylate

2-EHA is a reactive monomer for making acrylic polymers. 2-Ethylhexyl acetate is a non-reactive solvent ester, and butyl acrylate monomer is another acrylate monomer that SPC lists separately. Compare CAS numbers, not names.

Related product pages: Butyl Acrylate Monomer (BAM), Acrylic Acid, Octanol (2EH), 2-Ethylhexyl Acetate and Styrene Monomer.

2-EHA compared with related products
ProductCASRole
2-Ethylhexyl acrylate103-11-7MEHQ-inhibited acrylate monomer, polymerised into acrylic copolymers
2-Ethylhexyl acetate103-09-3Ester solvent (separate product page)
Butyl acrylate monomer (BAM)141-32-2Acrylate monomer (separate product page)
Source: SPC technical data sheets for each product

How to enquire for 2-EHA

Send the details below by WhatsApp or the enquiry form and expect a quote within 4 working hours.

  1. State the product and CAS number (2-ethylhexyl acrylate, 103-11-7).
  2. State the quantity you need and your preferred pack.
  3. Tell us the delivery location and your application (adhesive, emulsion, coating, sealant).
  4. Ask for the SDS, TDS and a sample batch Certificate of Analysis if your QA team needs them first.

Figures on this page are drawn from the manufacturer documents and safety data sheets we hold for this product. Content last checked 16 October 2026. Always confirm against the batch Certificate of Analysis supplied with every delivery.

Source Manufacturers

Sourced directly from verified manufacturers for consistent quality and traceability.

Supplied across South IndiaCoimbatoreMaduraiHosurBangaloreHyderabadVisakhapatnamKochi

Frequently Asked Questions

What is the full form of 2-EHA?

2-EHA stands for 2-ethylhexyl acrylate, also written 2-ethyl hexyl acrylate. It is the ester of acrylic acid and 2-ethylhexanol, CAS 103-11-7, IUPAC name 2-ethylhexyl prop-2-enoate.

Who supplies 2-ethylhexyl acrylate in Chennai?

Supreme Petro Chemicals, a Chennai importer and bulk distributor, supplies 2-EHA in drums with dispatch from Chennai across South India. Send the quantity and application by WhatsApp or the enquiry form and expect a quote within 4 working hours.

Does Supreme Petro Chemicals manufacture 2-EHA?

No. SPC is a trader, importer and bulk distributor. The producer is named on the TDS and on the batch Certificate of Analysis that is supplied with every delivery.

What is the difference between 2-ethylhexyl acrylate and 2-ethylhexyl acetate?

They are different chemicals. 2-Ethylhexyl acrylate (CAS 103-11-7) is a reactive, MEHQ-inhibited monomer that polymerises into acrylic resins. 2-Ethylhexyl acetate (CAS 103-09-3) is an ester solvent that SPC lists on its own product page. Check the CAS number before ordering.

Is the 2-EHA you supply food or pharma grade?

No. It is an inhibited monomer, technical grade, for industrial polymer, adhesive and coating use. Technical grade is not food or pharma grade.

What should I send to get a quote for 2-EHA?

Send the product and CAS number (103-11-7), the quantity and pack you need, your delivery location and your application. Ask for the TDS, SDS or a sample batch Certificate of Analysis if your QA team wants them first. We aim to quote within 4 working hours.

Packaging Options

Drums

Product Details

CAS NUMBER103-11-7
CATEGORYAromatic Solvents
GRADE
Inhibited monomer, technical grade

Need a bulk quote for 2-Ethylhexyl Acrylate?

Related Products

Often sourced with 2-Ethylhexyl Acrylate