About this product
Sodium Bi Sulphate — also written sodium bisulphate, sodium bisulfate, sodium hydrogen sulphate or sodium acid sulphate — is the acid salt NaHSO4, CAS 7681-38-1. We supply Technical Grade material as white granules / crystals at 95.0% min assay. It is an acid salt, so it dissolves to give a strongly acidic solution, with a pH of 1.0–1.4 on a 10% solution. We supply it at our Redhills warehouse in Chennai in 50 kg HDPE woven bags with LDPE liner and dispatch across South India.
Safety & Technical Documents
MSDS / SDS
Technical data sheet (TDS) & Certificate of Analysis
Batch Certificate of Analysis (CoA) · supplied with every delivery
Need another sheet? Browse the full SDS & TDS library — safety and technical data sheets for every product we supply.
Sodium Bi Sulphate at a glance
- Also known as
- sodium bisulphate · sodium bisulfate · sodium hydrogen sulphate · sodium acid sulphate · NaHSO4
- CAS number
- 7681-38-1
- HSN code
- 2833 19 90
CAS number and formula checked against PubChem on 21 October 2026. Full grade and property values are in the specifications below. More lookups: chemical abbreviations list · CAS number reference.
Applications & Uses
Grades & Technical Specifications
Grades & Technical Specifications
Physical Properties
- Appearance
- White granules / crystals
- Purity
- 95.0% min (as NaHSO4)
- Assay
- Sodium Bisulphate (NaHSO4) 95.0% min by mass; Sodium Sulphate (Na2SO4) 4.0% max; Free Sulphuric Acid (H2SO4) reported; Iron (as Fe) 50 ppm max; Moisture (as H2O) 0.5% max
- pH
- 1.0 – 1.4 (10% solution)
Supply & Packaging
- Packaging
- 50 kg HDPE woven bags with LDPE liner
- Grades Available
- Technical Grade
Compliance & Storage
- HS Code
- 2833 19 90
- Storage
- Store dry in tightly closed containers. Strongly acidic in solution and corrosive — avoid contact with metals and bases.
These specs are indicative. Request a Certificate of Analysis (COA) for batch-specific values.
Sodium bisulphate (NaHSO4) at a glance
Supreme Petro Chemicals is a Chennai trader and bulk distributor of industrial chemicals, not a manufacturer. The table gives the identity, grade, pack and documents for the sodium bisulphate we supply; a batch Certificate of Analysis is supplied with every delivery.
Technical grade is not food grade or pharma grade, and SPC lists no other grade of this product. Do not confuse it with sodium bisulphite (NaHSO3) or sodium metabisulphite (SMBS, Na2S2O5), which are different chemicals; the comparison table below sets them side by side.
| Item | Detail |
|---|---|
| Product name | Sodium Bi Sulphate (Sodium Bisulphate), Technical Grade |
| Other names | Sodium bisulfate, sodium hydrogen sulphate, sodium acid sulphate |
| Molecular formula | NaHSO4 |
| CAS number | 7681-38-1 |
| EC number | 231-665-7 |
| Form | White granules / crystals |
| Grade supplied | Technical Grade only (not food or pharma grade) |
| Assay | Sodium Bisulphate (NaHSO4) 95.0% mass min |
| Pack format we can quote | 50 kg HDPE woven bags with LDPE liner |
| Documents | TDS SPC-TDS-PWD-023, SDS, batch Certificate of Analysis supplied with every delivery |
Grade supplied: technical grade only
SPC supplies one grade of sodium bisulphate: Technical Grade, specified at NaHSO4 95.0% mass min, as white granules or crystals. It is an industrial grade and is not food grade or pharma grade.
The TDS cites the Aditya Birla Group (Grasim Industries Chemical Division) published technical-grade specification, and describes that producer as an ISO 9001 certified manufacturer. The product page lists Aditya Birla Group and GACL as source manufacturers.
If your process needs a food-contact, feed or pharmacopoeial sodium bisulphate, tell us before enquiring; this page describes technical grade only and no other grade is listed.
Sodium bisulphate specification (NaHSO4 95.0% min)
Technical grade sodium bisulphate is specified at NaHSO4 95.0% mass min, sodium sulphate (Na2SO4) 4.0% mass max, iron (as Fe) 50 ppm max, moisture 0.5% mass max, and a pH of 1.0 to 1.4 on a 10% solution. Free sulphuric acid is reported rather than limited.
Sodium sulphate is the one co-component the specification limits by name. Free sulphuric acid carries "Report" on the data sheet, meaning the value is stated for the batch and has no numeric limit. Confirm the figures for your delivery against the batch Certificate of Analysis.
| Parameter | Unit | Limit |
|---|---|---|
| Appearance | - | White granules / crystals |
| Sodium Bisulphate (NaHSO4) | % mass | 95.0 min |
| Sodium Sulphate (Na2SO4) | % mass | 4.0 max |
| Free Sulphuric Acid (H2SO4) | % mass | Report |
| Iron (as Fe) | ppm | 50 max |
| Moisture (as H2O) | % mass | 0.5 max |
| pH of 10% solution | - | 1.0 to 1.4 |
What is sodium bisulphate used for?
Sodium bisulphate is a dry, solid source of acidity, so it is used wherever a solution needs its pH lowered without handling a liquid mineral acid. The uses below are general knowledge about the chemical, not an SPC specification; SPC publishes no application data for this product, so confirm suitability against your own process.
Because this is technical grade, it is for industrial use only. It is not supplied for food, feed or pharmaceutical use. Tell us your intended use and we will confirm that the technical grade data sheet suits it before you order.
- Lowering the pH of water and process solutions (acidifying agent)
- Acidic cleaning and descaling formulations, for example bowl and surface cleaners
- A solid acid that can be stored and weighed as a powder, so no liquid acid tank or acid-dosing pump is needed for storage
Sodium bisulphate packing and supply in Chennai
We can quote sodium bisulphate in 50 kg HDPE woven bags with LDPE liner. Supreme Petro Chemicals is based in Chennai, with its head office at Periyamet and its warehouse at Redhills, and supplies manufacturers across South India.
The SDS notes that the product is hygroscopic and may cake with moisture, so keep bags sealed and dry. Call or WhatsApp +91 86675 84068 to discuss pack and quantity.
Documents: TDS, SDS and Certificate of Analysis
The TDS (SPC-TDS-PWD-023) and the SDS download from the sodium bisulphate product page, and a batch Certificate of Analysis is supplied with every delivery.
Check that the CAS number on the Certificate of Analysis and the SDS both read 7681-38-1 and match your purchase order.
| Document | What it gives you |
|---|---|
| TDS SPC-TDS-PWD-023 | Technical-grade specification: NaHSO4, Na2SO4, free H2SO4, iron, moisture and pH limits |
| SDS | 16-section safety data sheet, including GHS classification, handling, first aid and transport entries |
| Batch Certificate of Analysis | Batch results for the consignment, supplied with every delivery |
Is sodium bisulphate corrosive? Hazards and storage
The SDS classifies sodium bisulphate as Eye Dam. 1 (H318, causes serious eye damage), signal word Danger, GHS05. It is strongly acidic in solution and the TDS describes it as corrosive, so treat it as corrosive: use chemical splash goggles and gloves and keep it dry.
- Hazard: H318, causes serious eye damage; rinse eyes with water for at least 15 minutes and get medical attention
- Protective equipment: chemical splash goggles, chemical-resistant gloves (nitrile, butyl, neoprene or PVC), and a particulate respirator if dust cannot be controlled
- Storage: cool, dry, well-ventilated area in the original, tightly closed container; hygroscopic and may cake with moisture
- Keep away from strong oxidisers, strong alkalis and bases, and moisture; avoid contact with metals
- Spills: avoid raising dust, sweep or vacuum into labelled sealed containers; spilled material can be neutralised with dilute alkali such as sodium bicarbonate before disposal
- Fire: the product is not flammable, but fumes including sulphur dioxide can be released in a fire
- Transport: see SDS Section 14 and confirm the classification for your grade and mode of transport with your carrier before each shipment
Bisulphate vs bisulphite vs metabisulphite (SMBS)
Sodium bisulphate (NaHSO4) is an acid salt. Sodium bisulphite (NaHSO3) and sodium metabisulphite (SMBS, Na2S2O5) are sulphites used as reducing agents, and they release sulphur dioxide with acids. The names differ by one letter and are often mixed up on purchase orders, so quote the CAS number.
| Chemical | Formula and CAS | Nature |
|---|---|---|
| Sodium bisulphate (this page) | NaHSO4, 7681-38-1 | Acid salt; dissolves to a strongly acidic solution |
| Sodium bisulphite | NaHSO3, 7631-90-5 | Reducing agent; reacts with acids to liberate sulphur dioxide |
| Sodium metabisulphite (SMBS) | Na2S2O5, 7681-57-4 | Reducing agent and oxygen scavenger |
| Sodium sulphate (anhydrous) | Na2SO4, 7757-82-6 | Processing salt, not an acid salt |
How to enquire for sodium bisulphate
Send the product name with CAS 7681-38-1, the grade and the pack format; we reply with a quote within 4 working hours.
- Write "sodium bisulphate (NaHSO4), CAS 7681-38-1, technical grade" so it cannot be read as bisulphite or SMBS.
- Tell us the quantity you plan to order and the delivery location in South India.
- Say whether you need the TDS or the SDS sent ahead of the quote.
- Call or WhatsApp +91 86675 84068, or email admin@supremepetrochemicals.com.
- On delivery, match the CAS number on the batch Certificate of Analysis and the SDS to your purchase order.
Figures on this page are drawn from the manufacturer documents and safety data sheets we hold for this product. Content last checked 16 October 2026. Always confirm against the batch Certificate of Analysis supplied with every delivery.
Source Manufacturers
Sourced directly from verified manufacturers for consistent quality and traceability.
Supplied across South IndiaCoimbatoreMaduraiHosurBangaloreHyderabadVisakhapatnamKochi
Frequently Asked Questions
Is sodium bisulphate the same as sodium bisulfate, and what is its CAS number?
Yes. Bisulphate and bisulfate are British and American spellings of the same acid salt, NaHSO4, CAS 7681-38-1. Sodium hydrogen sulphate and sodium acid sulphate are further names for it. We supply it as Technical Grade white granules or crystals, NaHSO4 95.0% mass min. Quote the CAS number on any enquiry so the spelling cannot cause a mix-up.
What is the difference between sodium bisulphate, sodium bisulphite and sodium metabisulphite (SMBS)?
They are three different chemicals that are often mixed up when ordering. Sodium bisulphate is NaHSO4 (CAS 7681-38-1), an acid salt. Sodium bisulphite is NaHSO3 (CAS 7631-90-5) and sodium metabisulphite or SMBS is Na2S2O5 (CAS 7681-57-4); both are sulphites that release sulphur dioxide with acids. Check the CAS number on your requirement before you enquire.
What grade and specification of sodium bisulphate do you supply, and what is its pH?
Technical Grade only, as white granules or crystals, to the manufacturer's published technical-grade specification: NaHSO4 95.0% mass min, Na2SO4 4.0% max, iron (as Fe) 50 ppm max, moisture 0.5% max, free sulphuric acid reported, and pH 1.0 to 1.4 on a 10% solution. It is not food or pharma grade. The TDS and SDS download from the product page.
How soluble is sodium bisulphate in water?
The SDS describes it as freely soluble in water, approximately 28 g per 100 mL at 20 °C, and the solution is strongly acidic. Because the product is hygroscopic and may cake with moisture, keep bags tightly closed and dry until use, and check the batch Certificate of Analysis for the moisture figure of your delivery.
Is sodium bisulphate corrosive, and how should it be stored?
It is strongly acidic in solution, and the SDS classifies it as Eye Dam. 1 (H318, causes serious eye damage) with the signal word Danger. Handle it as corrosive. Store it dry in tightly closed containers in a cool, ventilated area, away from strong oxidisers, alkalis and bases, and wear splash goggles and chemical-resistant gloves.
What is sodium bisulphate used for?
As general knowledge, it is a dry, solid acid salt used to lower the pH of water and process solutions and in acidic cleaning and descaling formulations. Being a powder, it can be stored and weighed without a liquid acid tank. SPC publishes no application specification for it, so confirm suitability against your own process before ordering.
Is the sodium bisulphate you supply food grade?
No. We supply Technical Grade only, for industrial use. It is not food grade, feed grade or pharma grade, and no other grade of sodium bisulphate is listed on this page. If your process needs a food-contact or pharmacopoeial grade, tell us before you enquire.
What packaging and documents come with sodium bisulphate, and can I buy it in Chennai?
We can quote it in 50 kg HDPE woven bags with LDPE liner. Supreme Petro Chemicals is a Chennai supplier and distributor with its head office at Periyamet and warehouse at Redhills, serving manufacturers across South India. The TDS and SDS download from the product page, and a batch Certificate of Analysis is supplied with every delivery. Call or WhatsApp +91 86675 84068 for a quote.
Packaging Options
Product Details
Need a bulk quote for Sodium Bi Sulphate?