Alcohol / Ethers

Maleic Anhydride

CAS No. 108-31-6

  • Quote within 4 working hours
  • Batch CoA supplied with every delivery
  • Redhills, Chennai warehouse

About this product

Maleic anhydride (MA, MAN; CAS 108-31-6; HSN 2917 14 00) is a cyclic anhydride used as a raw material for polyester resin, alkyd resin and maleate ester plasticizers. Supreme Petro Chemicals, a Chennai trader and bulk distributor (not a manufacturer), supplies IS 5149:2020 white flakes, 99.2% mass min, in 25 kg bags. Transport is UN 2215, Class 8, Packing Group III. We quote within 4 working hours, and a batch Certificate of Analysis is supplied with every delivery.

Safety & Technical Documents

Technical data sheet (TDS) & Certificate of Analysis

Download TDSPDF

Batch Certificate of Analysis (CoA) · supplied with every delivery

Need another sheet? Browse the full SDS & TDS library — safety and technical data sheets for every product we supply.

Maleic Anhydride at a glance

Also known as
MA · MAN · cis-butenedioic anhydride · 2,5-furandione
CAS number
108-31-6
HSN code
2917.14.00
UN number
UN 2215

CAS number and formula checked against PubChem on 21 October 2026. Full grade and property values are in the specifications below. More lookups: chemical abbreviations list · CAS number reference.

Applications & Uses

Polyester resin synthesis
Alkyd resin production
Maleate ester plasticizers (DOM)
Resin & polymer intermediates

Grades & Technical Specifications

Physical Properties

Appearance
White to off-white solid pellets or flakes; pungent irritating odour
Purity
≥ 99.2% (IS 5149:2020, IGPL TDS)
Boiling Point
202°C
Melting Point
52.8°C
Solubility
Reacts with water to form maleic acid; soluble in acetone, ethyl acetate, toluene

Supply & Packaging

Packaging
25 kg HDPE bag25 kg carton with PE liner1000 kg jumbo bag
Grades Available
IndustrialTechnical
Origin
Imported

Compliance & Storage

HS Code
2917.14.00
UN Number
2215
Hazard Class
Class 8 — Corrosive solid (Packing Group III)
Storage
Cool, dry area. Keep away from moisture, oxidisers, and alkalis. Ensure ventilation — corrosive vapours.
Shelf Life
24 months from manufacture

These specs are indicative. Request a Certificate of Analysis (COA) for batch-specific values.

What is maleic anhydride? Full form, other names, CAS No, HSN and UN number

Maleic anhydride (abbreviated MA or MAN) is a cyclic anhydride with CAS No 108-31-6, HSN 2917 14 00 and UN 2215 (Class 8, Packing Group III). Supreme Petro Chemicals is a Chennai trader and bulk distributor, not a manufacturer, and supplies it as IS 5149:2020 white flakes. A batch Certificate of Analysis is supplied with every delivery.

It is a chemical intermediate for resin and plasticizer makers. Send us your grade, quantity, pack and destination and we will quote within 4 working hours.

Maleic anhydride (MA): identity at a glance
ItemDetail
AbbreviationsMA, MAN
Systematic and other namescis-butenedioic anhydride, 2,5-furandione
Chemical familyCyclic anhydride (chemical intermediate)
Molecular formula and molar massC4H2O3, about 98 g/mol (general chemistry)
CAS number108-31-6
EC number203-571-6
HSN code (India)2917 14 00 (maleic anhydride)
UN number and classUN 2215, Class 8 corrosive solid, Packing Group III
Grade suppliedIS 5149:2020, per the manufacturer's certificate of quality
Form and packWhite flakes, 25 kg bags (carton with PE liner and 1000 kg jumbo bag can be quoted)
DocumentsTDS SPC-TDS-ANH-002, SDS Rev 3.1 (July 2026), batch Certificate of Analysis supplied with every delivery
Source: SPC product data: TDS SPC-TDS-ANH-002, SDS Rev 3.1, SPC product data (verified row), SPC product data. Formula and molar mass: general chemistry.

Maleic anhydride grade: IS 5149:2020 white flakes (technical grade)

SPC lists one maleic anhydride grade: IS 5149:2020, certified on the manufacturer's certificate of quality, with 99.2% mass minimum maleic anhydride content. It is a technical (industrial) grade for industrial or professional use only per the SDS; it is not supplied as a food or pharma grade. Confirm grade suitability before regulated or consumer use.

The material described in our TDS is white flakes. No molten-supply claim is made on this page; ask us if you need a different form.

Maleic anhydride grade supplied by SPC
GradeStandardContentFormNote
IS 5149:2020 (technical)IS 5149:2020 per manufacturer's certificate of quality99.2% mass minWhite flakesIndustrial or professional use only. Not food or pharma grade.
Source: Manufacturer's TDS (SPC-TDS-ANH-002); SDS section 1

Maleic anhydride specification: IS 5149:2020 limits and typical properties

Our TDS (SPC-TDS-ANH-002) lists maleic anhydride content 99.2% mass min, maleic acid 0.8% mass max, crystallizing point 52.1 C min, colour of molten material 20 APHA max, ash 0.005% mass max and iron 10 ppm max, with white flakes free of visible impurities.

Crystallizing point is a specification test and is not the same figure as the literature melting point shown below.

Typical physical data from the SDS (literature values, verify against the batch Certificate of Analysis): melting about 52 to 53 C, boiling about 202 C, flash point about 102 to 103 C (closed cup), relative density about 1.48, vapour pressure about 0.2 mmHg at 20 C. It reacts with water to form maleic acid and is soluble in acetone, ethyl acetate and toluene.

Maleic anhydride IS 5149:2020 specification limits
ParameterUnitLimit
Maleic anhydride content% mass99.2 min
Maleic acid content% mass0.8 max
Crystallizing pointC52.1 min
Colour of molten materialAPHA20 max
Ash% mass0.005 max
Iron (as Fe)ppm10 max
Appearance-White flakes, no visible impurities
Source: Manufacturer's TDS (SPC-TDS-ANH-002), IS 5149:2020 per manufacturer's certificate of quality

What is maleic anhydride used for? Polyester resin, alkyd resin and DOM plasticizer

Maleic anhydride is used in polyester resin synthesis, alkyd resin production and maleate ester plasticizers such as DOM (di-octyl maleate). SPC supplies chemicals for resin and plasticizer manufacturers; we do not make any of these products ourselves.

Resin makers buy it alongside phthalic anhydride and aromatic solvents. Other industrial uses, such as 1,4-butanediol, lubricant additives and anhydride curing agents, are general knowledge and not a statement about SPC's lots.

Maleic anhydride applications
UseDetail
Polyester resin synthesisResin makers buy it alongside phthalic anhydride and aromatic solvents
Alkyd resin productionBought alongside phthalic anhydride
Maleate ester plasticizersDOM, di-octyl maleate (CAS 142-16-5)
Resin and polymer intermediatesListed application
Other industrial uses (general knowledge)1,4-butanediol, lubricant additives, curing agents; not an SPC specification
Source: SPC product data: SPC product data applications, SPC product data (resins). Last row: general knowledge.

Maleic anhydride packing: 25 kg bags, cartons and jumbo bags

The lead pack in our TDS is the 25 kg bag of white flakes. A 25 kg carton with PE liner and a 1000 kg jumbo bag can also be quoted. We supply Chennai, Tamil Nadu and South India from our Redhills, Chennai warehouse.

  • Packs: 25 kg bag (TDS), 25 kg carton with PE liner, 1000 kg jumbo bag (can quote). No drums are listed for this product.
  • Transport: UN 2215, MALEIC ANHYDRIDE, Class 8, Packing Group III; not a marine pollutant; the same classification is listed for road, sea and air.
  • Transport markings follow UN 2215, Class 8, PG III per SDS section 14; verify current carrier rules before shipment.
  • Shelf life: 24 months from manufacture, kept sealed, cool and dry.
  • Send grade, quantity, pack type and destination; we quote within 4 working hours.

Maleic anhydride SDS, TDS and Certificate of Analysis

A batch Certificate of Analysis is supplied with every delivery. The TDS (SPC-TDS-ANH-002) and SDS (Rev 3.1, July 2026) are available through the document buttons on this page and can be read against the batch certificate line by line.

  • Compare the CoA with the IS 5149:2020 limits in the specification table: content 99.2% min, maleic acid 0.8% max, crystallizing point 52.1 C min, colour 20 APHA max, ash 0.005% max, iron 10 ppm max.
  • As general practice, check that the CoA reports crystallizing point and not only a melting range; the two are different measurements.
  • As general chemistry, a rising maleic acid figure signals moisture exposure.
  • As general practice, confirm the batch number on the certificate matches the bags, and ask for the producer's original where a check matters.
  • For a step-by-step routine with worked examples, read the receiving inspection guide at /blog/maleic-anhydride-flakes-moisture-maleic-acid-coa-guide.

Maleic anhydride storage, moisture and safety

Keep maleic anhydride sealed in a cool, dry, ventilated area away from moisture, oxidisers and alkalis. It is corrosive and a respiratory and skin sensitiser (signal word Danger). This is a summary; always read the SDS.

  • GHS classification: Acute Tox. 4 (oral), Skin Corr. 1B, Resp. Sens. 1, Skin Sens. 1; pictograms GHS05, GHS07, GHS08.
  • Hazard statements: H302 harmful if swallowed; H314 causes severe skin burns and eye damage; H317 may cause an allergic skin reaction; H334 may cause allergy or asthma symptoms if inhaled.
  • Moisture: contact with water forms maleic acid. Separately, the specification limits maleic acid to 0.8% mass max.
  • Incompatible with strong oxidisers, strong bases, concentrated acids and halogens, per the SDS.
  • Handling: local exhaust ventilation; nitrile, butyl or neoprene gloves; chemical splash goggles (add a face shield if molten); respirator with organic vapour, acid gas and P100 cartridge where ventilation is inadequate.
  • The SDS lists OSHA PEL 1 ppm TWA, ACGIH TLV 0.1 ppm TWA and NIOSH REL 0.25 ppm TWA as US reference limits, and advises applying the ACGIH TLV or the most stringent applicable local standard; verify current local limits.
  • Shelf life 24 months from manufacture.

Maleic anhydride HSN code, IS 5149 and BIS: what we document

The HSN code is 2917 14 00 and the grade standard we document is IS 5149:2020 on the manufacturer's certificate of quality. This page makes no claim about a BIS licence or a quality control order for maleic anhydride; confirm the current position from official BIS and DPIIT notifications and ask us for the certificate for your lot.

We do not publish the customs duty rate on this page. The exposure limits quoted in the SDS are US reference limits.

Maleic anhydride regulatory and classification summary
ItemDetail
HSN code (India)2917 14 00
Grade standard documentedIS 5149:2020 (manufacturer's certificate of quality)
UN / transportUN 2215, Class 8, Packing Group III
GHS signal wordDanger (H302, H314, H317, H334)
Use restrictionIndustrial or professional use only, per the SDS
Source: SPC product data (verified), TDS SPC-TDS-ANH-002, SDS Rev 3.1 sections 1, 2, 14

Maleic anhydride supplier in Chennai: how to enquire

SPC is a trader and bulk distributor in Chennai, not a manufacturer. The TDS documents IG Petrochemicals Limited (IGPL), Taloja MIDC, Maharashtra as the maker of the IS 5149:2020 material we supply. Send your requirement and we quote within 4 working hours.

  1. Tell us the grade or standard you need (IS 5149:2020), the quantity, the pack type (25 kg bag, carton with PE liner or 1000 kg jumbo bag) and the destination.
  2. Call or WhatsApp Raj Kumar on +91 86675 84068, or use the enquiry form on this page.
  3. We reply with a quote within 4 working hours.
  4. A batch Certificate of Analysis is supplied with every delivery; the TDS and SDS are on this page to review in advance.

Maleic anhydride vs phthalic anhydride, maleic acid and fumaric acid

Maleic anhydride (crystallizing point 52.1 C min) is a lower-melting compound than phthalic anhydride (crystallizing point 130.8 C min). Maleic acid is the hydrolysis product of maleic anhydride, and fumaric acid is the trans isomer of maleic acid.

In the phthalic anhydride specification, maleic anhydride is capped as an impurity at 0.1% mass max. Food grade fumaric acid caps maleic acid at 0.05 wt% max, which is a different product from this technical-grade anhydride.

DOM (di-octyl maleate, CAS 142-16-5) is the maleate ester derived from maleic anhydride; it is a separate product.

Maleic anhydride compared with related compounds
CompoundCASKey pointRelationship
Maleic anhydride108-31-6Crystallizing point 52.1 C min (IS 5149:2020); UN 2215This product
Phthalic anhydride85-44-9Crystallizing point 130.8 C min; maleic anhydride capped at 0.1% mass maxDifferent anhydride, used alongside in resins
Maleic acid110-16-7Capped at 0.8% mass max in maleic anhydrideHydrolysis product of the anhydride
Fumaric acid110-17-8Trans isomer of maleic acid; food grade caps maleic acid at 0.05 wt% maxIsomer of maleic acid
DOM (di-octyl maleate)142-16-5Ester content 99.0% mass minMaleate ester derived from maleic anhydride
Source: SPC product FAQs and product data (phthalic anhydride, fumaric acid, DOM entries); maleic acid CAS: general knowledge

Figures on this page are drawn from the manufacturer documents and safety data sheets we hold for this product. Content last checked 16 October 2026. Always confirm against the batch Certificate of Analysis supplied with every delivery.

Source Manufacturers

Sourced directly from verified manufacturers for consistent quality and traceability.

Supplied across South IndiaCoimbatoreMaduraiHosurBangaloreHyderabadVisakhapatnamKochi

Frequently Asked Questions

What is the CAS No of maleic anhydride, and what are its other names and formula?

The CAS No of maleic anhydride is 108-31-6, consistent across the catalogue, the technical data sheet and the safety data sheet. Its EC number is 203-571-6. It is abbreviated MA or MAN, with systematic names cis-butenedioic anhydride and 2,5-furandione. As general chemistry its formula is C4H2O3, about 98 g/mol.

What is the HSN code for maleic anhydride, and is BIS certification or a QCO required?

The HSN code for maleic anhydride is 2917 14 00, with the tariff text 'Maleic anhydride'. We publish the HSN code only and do not state a duty rate. We also state no BIS licence or quality control order status; the standard on the manufacturer's certificate of quality is IS 5149:2020. Check current BIS and DPIIT notifications.

What are the IS 5149:2020 limits for maleic anhydride?

Our technical data sheet SPC-TDS-ANH-002 lists maleic anhydride content 99.2% mass min, maleic acid 0.8% mass max, crystallizing point 52.1 C min, colour of molten material 20 APHA max, ash 0.005% mass max and iron 10 ppm max, as white flakes with no visible impurities. Crystallizing point is a specification test, not the same as the literature melting point of about 52 to 53 C in the safety data sheet.

Who are the maleic anhydride manufacturers in India, and who supplies it in Chennai?

SPC is not a manufacturer; we are a Chennai trader and bulk distributor with a head office in Periyamet and a warehouse in Redhills. Our technical data sheet documents IG Petrochemicals Limited (IGPL), Taloja MIDC, Maharashtra as the maker of the IS 5149:2020 material we supply. The lead pack is a 25 kg bag of white flakes; a carton with PE liner and a 1000 kg jumbo bag can be quoted. We quote within 4 working hours.

What UN number and hazard class apply to maleic anhydride transport?

Maleic anhydride is UN 2215, proper shipping name MALEIC ANHYDRIDE, Class 8 corrosive solid, Packing Group III. The safety data sheet lists the same classification for road, sea and air and states it is not a marine pollutant. Transport markings follow UN 2215, Class 8, PG III per SDS section 14; verify current carrier rules before each shipment.

How should maleic anhydride be stored, and what is its shelf life?

Contact with water forms maleic acid, and the specification limits maleic acid to 0.8% mass max. Store sealed in a cool, dry, ventilated area away from moisture, oxidisers and alkalis. Shelf life is 24 months from manufacture; check the manufacture date on the batch Certificate of Analysis.

What are the GHS hazard statements and PPE for maleic anhydride?

Our safety data sheet classifies it as Acute Tox. 4 (oral), Skin Corr. 1B, Resp. Sens. 1 and Skin Sens. 1, signal word Danger, with H302, H314, H317 and H334. It advises local exhaust ventilation, nitrile, butyl or neoprene gloves, splash goggles, a face shield if molten, and a respirator with organic vapour, acid gas and P100 cartridge where ventilation is inadequate. US reference limits are OSHA PEL 1 ppm, ACGIH TLV 0.1 ppm and NIOSH REL 0.25 ppm.

What is maleic anhydride used for?

Its listed applications are polyester resin synthesis, alkyd resin production, maleate ester plasticizers such as DOM (di-octyl maleate) and resin and polymer intermediates. Resin makers buy it with phthalic anhydride and aromatic solvents. SPC supplies it for these manufacturers; we do not make resins or plasticizers.

What is the difference between maleic anhydride, phthalic anhydride, maleic acid and fumaric acid?

Maleic anhydride (CAS 108-31-6) has a crystallizing point of 52.1 C min; phthalic anhydride (CAS 85-44-9) has 130.8 C min and caps maleic anhydride as an impurity at 0.1% mass max. Maleic acid is what maleic anhydride becomes on contact with water; our specification caps it at 0.8% mass max. Fumaric acid (CAS 110-17-8) is the trans isomer of maleic acid, and food grade fumaric acid caps maleic acid at 0.05 wt% max.

Is maleic anhydride food grade or pharma grade?

No. SPC's maleic anhydride is an IS 5149:2020 technical (industrial) grade for industrial or professional use only per the safety data sheet. It is not supplied as a food or pharma grade. Confirm grade suitability before regulated or consumer use.

Packaging Options

25 kg HDPE bag
25 kg carton with PE liner
1000 kg jumbo bag

Product Details

CAS NUMBER108-31-6
CATEGORYAlcohol / Ethers
GRADE
IndustrialTechnical

Need a bulk quote for Maleic Anhydride?

Related Products

Often sourced with Maleic Anhydride

Guides

Reading on Maleic Anhydride