Chemicals for each stage of automobile and electronics manufacturing.
Stage 1: Parts and precision cleaning
General knowledge: fast-evaporating solvents lift oils, flux residue and fingerprints. Water and non-volatile residue limits matter most, so compare the TDS rows with your own cleaning spec. MDC is Carc. 1B (H350) on our SDS; apply the carcinogen controls your site requires.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Isopropyl Alcohol (IPA) | Technical (99.8% min GC) | Assay 99.8% min (GC) | 67-63-0 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Methylene Di Chloride (MDC) | Technical Grade, stabilised | Assay 99.95% min (GC) | 75-09-2 | 250 kg MS barrel, 1000L IBC tank, Bulk tanker (ISO) |
| Acetone | Industrial, Technical | Assay 99.5% min (GC) | 67-64-1 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
Stage 2: Paints, coatings and adhesives
General knowledge: solvent choice sets drying speed and film flow, so confirm fit by a trial in your own system.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Toluene | Industrial, Technical, Nitration | Assay 99.5% min (GC) | 108-88-3 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Methyl Ethyl Ketone (MEK) | Industrial, Technical | Assay 99.5% min (GC) | 78-93-3 | 200L MS barrel, 1000L IBC tank |
| Butyl Acetate | Solvent Grade (grade per TDS: ASTM D4615) | n-Butyl Acetate 99.5 % w/w min | 123-86-4 | Bulk road tanker, HDPE drums, MS drums |
Stage 3: Coolant and fluid formulation
General knowledge: glycols are the freezing-point-lowering base of engine coolant. The inhibitor package and finished coolant come from the blender.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Mono Ethylene Glycol (MEG) | Fibre, Industrial, Antifreeze | Assay 99.9% min | 107-21-1 | 230 kg HDPE barrel, 1000L IBC tank, Bulk tanker |
| Diethylene Glycol (DEG) | Industrial Grade only | 99.80% wt min DEG | 111-46-6 | Bulk tanker, 230 kg drums |
Stage 4: PVC compounds
General knowledge, not confirmed for any SPC customer: PVC insulation and sheathing on cables is commonly softened with a plasticizer ester. Check the choice against your compound and any phthalate limits.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Di Octyl Phthalate (DOP) | Kanatol-800, primary PVC plasticizer | 99.50% min ester content | 117-81-7 | Bulk road tanker, 200 kg and 225 kg HDPE / MS drums |
| Di Octyl Terephthalate (DOTP) | Kanatol-8080, non-phthalate PVC plasticizer | 99.50% min (GC, by area) | 6422-86-2 | MS drums, Bulk tankers |
Figures are the grades and specifications we supply, as published on each product page. A batch Certificate of Analysis carries the exact numbers.
34 chemicals for automobiles / electronics
Acetone
CAS 67-64-1Methylene Di Chloride (MDC)
CAS 75-09-22-Ethylhexyl Acrylate
CAS 103-11-72-Ethylhexyl Acetate
CAS 103-09-3Benzene
CAS 71-43-2Butyl Acrylate Monomer (BAM)
CAS 141-32-2Cyclo Hexane
CAS 110-82-7Cyclo Hexanone
CAS 108-94-1Di Methyl Formamide (DMF)
CAS 68-12-2Methyl Ethyl Ketone (MEK)
CAS 78-93-3Methyl Iso Butyl Ketone (MIBK)
CAS 108-10-1Mixed Xylene
CAS 1330-20-7Meta Xylene
CAS 108-38-3Nitro Benzene
CAS 98-95-3Octanol (2EH)
CAS 104-76-7Ortho Xylene
CAS 95-47-6Phenol (Liquid / Crystal)
CAS 108-95-2Styrene Monomer
CAS 100-42-5Toluene
CAS 108-88-3Vinyl Acetate Monomer (VAM)
CAS 108-05-4Diethylene Glycol (DEG)
CAS 111-46-6Dipropylene Glycol (DPG)
CAS 25265-71-8Mono Ethylene Glycol (MEG)
CAS 107-21-1PEG 200 / 400 / 600 / 2000 / 3350 / 4000 / 6000
CAS 25322-68-3Propylene Glycol (PG)
CAS 57-55-6Propylene Glycol Methyl Ether Acetate (PGMEA)
CAS 108-65-6Methoxy Propanol (PGMME)
CAS 107-98-2Chlorinated Paraffin Wax (CPW)
CAS 63449-39-8Di Butyl Phthalate (DBP)
CAS 84-74-2Di Ethyl Phthalate (DEP)
CAS 84-66-2Di Octyl Maleate (DOM)
CAS 142-16-5Di Octyl Phthalate (DOP)
CAS 117-81-7Di Octyl Terephthalate (DOTP)
CAS 6422-86-2Trichloroethylene (TCE)
CAS 79-01-6Frequently Asked Questions
What chemicals do automobile and electronics manufacturers buy from SPC?
IPA and MDC for cleaning, toluene, acetone, MEK and butyl acetate for coatings and adhesives, MEG and DEG for coolant and fluid formulations, and DOP or DOTP as PVC plasticizers. We are a Chennai trader and importer, so we supply the chemical and its paperwork, not the finished product. Tell us your grade limits, pack and quantity with the enquiry, and we quote within 4 working hours.
Does SPC make car parts, circuit boards or coolant?
No. SPC supplies chemicals for automobile and electronics manufacturers; we do not make vehicles, boards, coatings or finished coolants. The glycols we list are raw materials, and the inhibitor package in a finished coolant is added by the blender. Our role is sourcing the chemical, matching it to your specification, and supplying the batch Certificate of Analysis with every delivery.
What IPA specification does SPC list, and how is it classed for transport?
Technical grade IPA is listed at 99.8% min assay by GC, with water 0.10% w/w max and non-volatile residue 0.005% w/v max on the TDS. It is flammable: UN 1219, Class 3, Packing Group II, closed-cup flash point 12 C. Compare the TDS rows with your own cleaning specification, and store it away from ignition sources with containers closed.
What MDC do you supply, and what are its hazards?
The MDC listed is Technical Grade, stabilised, at 99.95% min by GC, in 250 kg MS barrels, 1000 L IBC tanks or ISO bulk tanker. For transport it is UN 1593, Class 6.1 toxic, Packing Group III. Our SDS classes it Carc. 1B (H350, may cause cancer), so apply the carcinogen controls your site and local rules require before using it for degreasing.
Which glycols does SPC supply for coolant and antifreeze formulations?
MEG is listed in Fibre, Industrial and Antifreeze grades at 99.9% min assay, and DEG in Industrial Grade at 99.80% wt min. Both come from the manufacturers named on the product pages, such as Reliance Industries, IOCL and Clariant India Glycols. The inhibitor package and the finished coolant are made by the blender, not by us.
Can the DEG be used in food, pharma or cosmetic products?
No. The DEG we list is Industrial Grade only, so do not use it where a food, pharma or cosmetic grade is required. Industrial DEG belongs in industrial fluid and chemical uses, and the grade should be checked against your own specification and the batch Certificate of Analysis before use.
Which solvents suit paints, adhesives and sealants?
Toluene, MEK, acetone and butyl acetate are the solvents we list for coatings and adhesives. Butyl acetate is listed as Solvent Grade, grade per TDS: ASTM D4615, at 99.5 % w/w min. Solvent choice affects drying speed and film flow, which is general coatings knowledge, so confirm fit by a trial in your own system.
Which plasticizers do you supply for PVC compounds?
DOP (Kanatol-800, a primary plasticizer for PVC, 99.50% min ester content) and DOTP (Kanatol-8080, a non-phthalate PVC plasticizer, 99.50% min by GC). Use in cable insulation is general industry knowledge and is not confirmed for any SPC customer, so check the choice against your compound and any phthalate limits.
What documents come with an order?
A batch Certificate of Analysis is supplied with every delivery, and the SDS and TDS are available for the products that have them. Send your limits, such as water or residue, before ordering so we can compare them with the TDS. We quote within 4 working hours.
Deep guidesMDC buyer guide for ChennaiIPA buyer guide: industrial procurement in ChennaiPropylene glycol vs ethylene glycol: selection guideToluene buyer guide
Sourcing chemicals for automobiles / electronics?
Tell us your requirement — product, quantity, and frequency. We respond within 4 working hours with pricing and availability.