AcidsAromatic SolventsPlasticizers & Chlorinated

Chemicals for R&D & Laboratory Users — Industrial & Pharmacopoeial Grades, Chennai

Supreme Petro Chemicals, a Chennai trader and importer since 1997, supplies chemicals for R&D laboratories and QC departments: IPA in Technical and IP grade, glycerine to IP 2022, MDC, acetone and toluene. Grades are industrial, technical or pharmacopoeial as stated on each product page; we do not list AR, LR, HPLC or ACS reagent grades, and we do not make reagents. A batch Certificate of Analysis comes with every delivery; we quote within 4 working hours.

Formulator's raw-material map

Every role in the process, by grade.

01

Extraction and reaction work-up

General knowledge, not an SPC specification: labs use volatile solvents to extract, partition and recrystallise, and the choice turns on polarity, boiling point and residue. SPC supplies these solvents in the grades below only; if your method calls for a reagent or pharmacopoeial solvent grade, name the standard in your enquiry and we will confirm what is listed.

ProductGrade we supplyActive matter / key specCASPackaging
Methylene Di Chloride (MDC)Technical Grade, stabilised (min. 99.95% GC)≥ 99.95%75-09-2250 kg MS barrel, 1000L IBC tank, Bulk tanker (ISO)
AcetoneIndustrial, Technical99.5% min (GC)67-64-1200L MS barrel, 1000L IBC tank, Bulk tanker
TolueneIndustrial, Technical, Nitration grade99.5% min (GC)108-88-3200L MS barrel, 1000L IBC tank, Bulk tanker
Hexane (Food / Pharma Grade)Food / Pharma Grade (IS 3470)n-Hexane Min. 44.0 wt%; total saturates Min. 98.5 %V (commercial hexane fraction, not a single-component product)110-54-3Bulk tanker, Drums
02

Cleaning, rinsing and wipe-down

General knowledge, not an SPC specification: fast-evaporating, water-miscible solvents are used to rinse and wipe glassware and equipment, where water content and non-volatile residue matter. Compare those limits on the TDS with your own cleaning procedure; whether a technical grade is acceptable is your laboratory's decision.

ProductGrade we supplyActive matter / key specCASPackaging
Isopropyl Alcohol (IPA)Technical (99.8% min GC); IP (Indian Pharmacopoeia, 99.0% v/v min)≥ 99.8%67-63-0200L MS barrel, 1000L IBC tank, Bulk tanker
AcetoneIndustrial, Technical99.5% min (GC)67-64-1200L MS barrel, 1000L IBC tank, Bulk tanker
03

Excipients and formulation development

General knowledge, not an SPC specification: development labs trial humectants, polyols and glycols as vehicles and excipients before scale-up. Pharmacopoeial status is set by the monograph named on the grade, so compare IP, USP, BP and EP lines by their own limits and ask for the standard and edition you need.

ProductGrade we supplyActive matter / key specCASPackaging
Glycerine (Refined Glycerine, IP)IP — Indian Pharmacopoeia 202298.0 – 101.0 % (anhydrous basis)56-81-5250 kg HDPE drums
Glycerin USPUSP (USP-NF 2026); BP and EP conformity certified on the same batch certificate99.0 - 101.0 % (anhydrous basis)56-81-5250 kg new HDPE drums
Propylene Glycol (PG)Pharmacopoeial (IP/USP/BP/EP)NLT 99.5% w/v (as C3H8O2, by GLC)57-55-6HDPE/MS drums, 215 kg net
Polyethylene Glycol (PEG 200 to 6000)Industrial, Pharma (USP)Spec table on the product page covers PEG 400 only25322-68-3200 kg HDPE barrel (PEG 200–600), 25 kg HDPE bag (PEG 3350–6000), 50 kg woven sack (PEG 3350–6000), 1000L IBC (PEG 200–600)

Figures are the grades and specifications we supply, as published on each product page. A batch Certificate of Analysis carries the exact numbers.

Relevant Products

46 chemicals for r&d / laboratories

Request Bulk Quote
Acids

Acetic Acid

CAS 64-19-7
View details
Acids

Acid Slurry

CAS 27176-87-0
View details
Acids

Acid Thickener

View details
Acids

Acrylic Acid

CAS 79-10-7
View details
Acids

Alphox 200

CAS 9016-45-9
View details
Acids

Benzoic Acid

CAS 65-85-0
View details
Acids

Boric Acid

CAS 10043-35-3
View details
Acids

Chromic Acid

CAS 1333-82-0
View details
Acids

Citric Acid Anhydrous

CAS 77-92-9
View details
Acids

Citric Acid Monohydrate

CAS 5949-29-1
View details
Acids

Formic Acid

CAS 64-18-6
View details
Acids

Fumaric Acid

CAS 110-17-8
View details
Acids

Hydrochloric Acid (HCL)

CAS 7647-01-0
View details
Acids

Hydrogen Peroxide

CAS 7722-84-1
View details
Acids

Nitric Acid

CAS 7697-37-2
View details
Acids

Oleic Acid

CAS 112-80-1
View details
Acids

Oxalic Acid

CAS 6153-56-6
View details
Acids

Phosphoric Acid

CAS 7664-38-2
View details
Acids

Sulphuric Acid

CAS 7664-93-9
View details
Aromatic Solvents

2-Ethylhexyl Acrylate

CAS 103-11-7
View details
Aromatic Solvents

2-Ethylhexyl Acetate

CAS 103-09-3
View details
Aromatic Solvents

Acetone

CAS 67-64-1
View details
Aromatic Solvents

Benzene

CAS 71-43-2
View details
Aromatic Solvents

Butyl Acrylate Monomer (BAM)

CAS 141-32-2
View details
Aromatic Solvents

Cyclo Hexane

CAS 110-82-7
View details
Aromatic Solvents

Cyclo Hexanone

CAS 108-94-1
View details
Aromatic Solvents

Di Methyl Formamide (DMF)

CAS 68-12-2
View details
Aromatic Solvents

Methyl Ethyl Ketone (MEK)

CAS 78-93-3
View details
Aromatic Solvents

Methyl Iso Butyl Ketone (MIBK)

CAS 108-10-1
View details
Aromatic Solvents

Mixed Xylene

CAS 1330-20-7
View details
Aromatic Solvents

Meta Xylene

CAS 108-38-3
View details
Aromatic Solvents

Nitro Benzene

CAS 98-95-3
View details
Aromatic Solvents

Octanol (2EH)

CAS 104-76-7
View details
Aromatic Solvents

Ortho Xylene

CAS 95-47-6
View details
Aromatic Solvents

Phenol (Liquid / Crystal)

CAS 108-95-2
View details
Aromatic Solvents

Styrene Monomer

CAS 100-42-5
View details
Aromatic Solvents

Toluene

CAS 108-88-3
View details
Aromatic Solvents

Vinyl Acetate Monomer (VAM)

CAS 108-05-4
View details
Plasticizers & Chlorinated

Chlorinated Paraffin Wax (CPW)

CAS 63449-39-8
View details
Plasticizers & Chlorinated

Di Butyl Phthalate (DBP)

CAS 84-74-2
View details
Plasticizers & Chlorinated

Di Ethyl Phthalate (DEP)

CAS 84-66-2
View details
Plasticizers & Chlorinated

Di Octyl Maleate (DOM)

CAS 142-16-5
View details
Plasticizers & Chlorinated

Di Octyl Phthalate (DOP)

CAS 117-81-7
View details
Plasticizers & Chlorinated

Di Octyl Terephthalate (DOTP)

CAS 6422-86-2
View details
Plasticizers & Chlorinated

Methylene Di Chloride (MDC)

CAS 75-09-2
View details
Plasticizers & Chlorinated

Trichloroethylene (TCE)

CAS 79-01-6
View details
Why SPC

Why SPC for R&D / Laboratories

01

Pharmacopoeial lines where we list them: IPA in IP grade, glycerine to IP 2022, glycerin to USP with BP and EP conformity on the batch certificate, and propylene glycol (IP/USP/BP/EP)

02

Technical and industrial solvents with the grade stated plainly on each product page, so your QA team can match the grade to the method before ordering

03

SDS and TDS on the product pages where documented, a batch Certificate of Analysis supplied with every delivery, and a quote within 4 working hours

Frequently Asked Questions

Do you supply AR, LR, HPLC or ACS grade solvents?

No. We supply industrial, technical and, for some products, pharmacopoeial grades, and we do not list analytical reagent (AR), laboratory reagent (LR), HPLC or ACS grades. If your method specifies one of those, buy the reagent grade from a reagent supplier. If a technical or pharmacopoeial grade can serve your cleaning, extraction or development work, send us the specification and we will say which listed grade comes closest.

Which grades can a laboratory buy from SPC?

IPA in Technical (99.8% min by GC) and IP (Indian Pharmacopoeia, 99.0% v/v min) grade; glycerine to IP 2022; glycerin to USP with BP and EP conformity on the batch certificate; propylene glycol (IP/USP/BP/EP); hexane to IS 3470 (food / pharma grade); and technical or industrial MDC, acetone and toluene. Each product page names the grade, and the documents we can supply differ by product.

What is the difference between IP, BP and USP grade?

IP, BP and USP are the Indian, British and United States pharmacopoeias. Each sets its own limits and test methods, so a material that meets one does not automatically meet another. Name the pharmacopoeia and edition in your enquiry. For glycerine, our IP line is tested to IP 2022 and a separate imported line covers USP with BP and EP conformity on the same batch certificate.

Is IP grade IPA the same as ordinary IPA?

IPA means isopropyl alcohol. IP is a grade label meaning Indian Pharmacopoeia. We list IPA in two grades: Technical at 99.80% w/w minimum by GC, and IP at 99.0% v/v minimum. The units differ (weight versus volume), so the two assay figures cannot be compared directly. Technical grade is not a pharmacopoeial grade.

Do you make MDC or any other chemical you sell?

No. Supreme Petro Chemicals is a trader, importer and bulk distributor; the products come from the manufacturers named on the TDS. We supply chemicals to your laboratory or process, and we do not make reagents or your end products.

Is MDC available in a pharmaceutical or reagent grade?

No. The MDC we list is Technical Grade, stabilised, 99.95% min by GC to the manufacturer TDS, and we state no IP, BP or USP grade for it. MDC is classed Carcinogen Category 1B and transported as UN 1593, Class 6.1, so read the SDS before handling and use closed systems or local exhaust ventilation.

Can I use technical grade IPA or acetone to clean glassware or wipe equipment?

That is your laboratory's call, made against your own cleaning procedure. As general knowledge, residue and water matter for cleaning. For technical IPA the TDS lists water 0.10% w/w maximum and non-volatile residue 0.005% w/v maximum. Compare these limits with your acceptance criteria and check the batch Certificate of Analysis on delivery.

Which documents come with an order?

A batch Certificate of Analysis is supplied with every delivery. SDS and TDS are available from the product pages where they are documented; for example, toluene has a TDS for the nitration grade only, so ask which documents exist for the grade you need. Tell us at enquiry what your quality team requires.

Do you sell small laboratory packs?

Our listed packs are mainly drums, IBCs and bulk, for example 200 L IPA barrels and 250 kg glycerine drums. Pack formats are confirmed when we quote, so state the pack and quantity you want in your enquiry and we will confirm what is listed for that product. We do not assume smaller packs are available.

How do I check diethylene glycol and ethylene glycol in glycerine?

Read the results reported on the batch Certificate of Analysis. The IP data sheet shows 0.10% maximum each of ethylene glycol and diethylene glycol, as reported on the maker certificates. Which tests you repeat on receipt is set by your own incoming-inspection plan.

Which of these solvents are flammable?

IPA has a closed-cup flash point of 12 C, acetone -20 C and toluene 4 C, all Class 3 flammable liquids. MDC is not flammable but is toxic. Store flammables tightly closed in a cool, ventilated place away from ignition sources and use non-sparking tools and grounding for transfers. The SDS for each product has the full handling guidance.

What should I send for a laboratory chemical quote?

Send: (1) product and grade, with the standard and edition if any; (2) quantity, with units stated clearly; (3) preferred pack; (4) delivery location; (5) your end use and the method or specification the chemical must satisfy; (6) the documents your QA needs, such as SDS, TDS and batch Certificate of Analysis. We quote within 4 working hours on +91 86675 84068 or through the enquiry form.

Where do you supply from?

Our head office is in Periyamet and our warehouse is at Redhills, Chennai, and we supply customers across South India from there. Delivery arrangements are confirmed when we quote.

Deep guidesIPA grades: Technical versus IPGlycerine grades: IP, USP, BP, EP and technicalMDC buyer guide: grade, packing and safetyHow to read an MSDS / SDS

Industry Enquiry

Sourcing chemicals for r&d / laboratories?

Tell us your requirement — product, quantity, and frequency. We respond within 4 working hours with pricing and availability.