Every role in the formulation, supplied.
Fast-release carrier solvents
General guidance, not an SPC specification: the solvent carries resin and pigment and must flash off in the dryer. Ethyl acetate and n-propyl acetate are the ester solvents commonly used in this role in flexo and gravure inks. Grades and limits are from SPC product data sheets; cells are lightly normalised from productSpecs.ts and the TDS files, so check the linked product page for the full sheet.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Ethyl Acetate | Commercial / Industrial Grade — 99.80% min purity | Ethyl acetate 99.80% w/w min; water 0.1000% w/w max; acidity as acetic acid 0.0100% w/w max | 141-78-6 | Bulk tankers (dedicated cleaned tankers) |
| N-Propyl Acetate | Technical Grade (99.5% min) | Purity min. 99.50 %w/w | 109-60-4 | Drums, Bulk tanker |
Slower solvents for flow and levelling
General guidance: a slower-evaporating solvent keeps the film open longer so it can level and transfer cleanly. Grades and limits are from SPC product data sheets; check the linked product page for the full sheet.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| n-Butyl Acetate | Solvent Grade (grade per TDS: ASTM D4615) | n-Butyl acetate 99.5% w/w min; water 0.10% w/w max; acidity (as acetic acid) 0.01% w/w max; colour 10 APHA max | 123-86-4 | Bulk road tanker, HDPE drums, MS drums |
| Butanol (NBA) | Industrial Grade (BIS certified) | 99.50 wt% min (per batch CoA) | 71-36-3 | Bulk road tanker |
Alcohol co-solvent and viscosity control
General guidance: IPA is a fast-evaporating alcohol used as a co-solvent and for viscosity adjustment, and for press and roller cleaning. Confirm compatibility with your resin system in a trial. Grades and limits are from SPC product data sheets.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Isopropyl Alcohol (IPA) | Technical (99.8% min GC) | Assay 99.8% min (GC); water 0.10% w/w max | 67-63-0 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
Strong solvents for resin dissolution
General guidance: aromatic and ketone solvents give high dissolving power for resins in solvent-based inks and adhesives. Check your customer and local requirements on aromatic solvents for your end product. Grades and limits are from SPC product data sheets.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Toluene | Industrial / Technical | Purity ≥ 99.5% (GC) | 108-88-3 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Methyl Ethyl Ketone (MEK) | Industrial / Technical | Purity ≥ 99.5% (GC) | 78-93-3 | 200L MS barrel, 1000L IBC tank |
Figures are the grades and specifications we supply, as published on each product page. A batch Certificate of Analysis carries the exact numbers.
43 chemicals for flexo & roto printing
Ethyl Acetate
CAS 141-78-6Isopropyl Alcohol (IPA)
CAS 67-63-0Toluene
CAS 108-88-3Butyl Acetate
CAS 123-86-4Benzyl Alcohol
CAS 100-51-6Butanol (NBA)
CAS 71-36-3Butyl Carbitol
CAS 112-34-5Butyl Cellosolve (Glycol)
CAS 111-76-2Butyl Cellosolve Acetate
CAS 112-07-2Di Ethanol Amine (DEA)
CAS 111-42-2Di Methyl Amine (DMA)
CAS 124-40-3Diacetone Alcohol
CAS 123-42-2Ethyl Cellosolve
CAS 110-80-5Ethyl Cellosolve Acetate
CAS 111-15-9Glycerine
CAS 56-81-5Glycerin USP
CAS 56-81-5Glycerol Mono Stearate (GMS)
CAS 31566-31-1Hexane (Food Grade)
CAS 110-54-3Iso-Butanol
CAS 78-83-1Maleic Anhydride
CAS 108-31-6Phthalic Anhydride
CAS 85-44-9Mono Ethanol Amine (MEA)
CAS 141-43-5N-Propanol
CAS 71-23-8N-Propyl Acetate
CAS 109-60-4Tri Ethanol Amine (TEA) 85%/99%
CAS 102-71-62-Ethylhexyl Acrylate
CAS 103-11-72-Ethylhexyl Acetate
CAS 103-09-3Acetone
CAS 67-64-1Benzene
CAS 71-43-2Butyl Acrylate Monomer (BAM)
CAS 141-32-2Cyclo Hexane
CAS 110-82-7Cyclo Hexanone
CAS 108-94-1Di Methyl Formamide (DMF)
CAS 68-12-2Methyl Ethyl Ketone (MEK)
CAS 78-93-3Methyl Iso Butyl Ketone (MIBK)
CAS 108-10-1Mixed Xylene
CAS 1330-20-7Meta Xylene
CAS 108-38-3Nitro Benzene
CAS 98-95-3Octanol (2EH)
CAS 104-76-7Ortho Xylene
CAS 95-47-6Phenol (Liquid / Crystal)
CAS 108-95-2Styrene Monomer
CAS 100-42-5Vinyl Acetate Monomer (VAM)
CAS 108-05-4Frequently Asked Questions
Which solvents are used in flexo and roto (gravure) printing inks?
Solvent-based flexo and gravure inks typically use a blend: an ester such as ethyl acetate or n-propyl acetate for fast release, an alcohol such as IPA or n-butanol as co-solvent, and sometimes toluene or MEK for resin dissolving power. The exact blend depends on your resin and substrate and is set by trial. We supply these solvents to ink manufacturers and printers.
Does SPC make printing inks or flexo and roto printing products?
No. Supreme Petro Chemicals is a Chennai trader, importer and bulk distributor. We supply chemicals for flexo and roto printing ink manufacturers and printers. We do not make inks, films, labels or packaging.
Why is ethyl acetate so common in gravure and flexo inks?
It is a fast-evaporating ester that dissolves many ink resins and flashes off quickly in the dryer. Our ethyl acetate is Commercial / Industrial Grade; purity, water and acidity limits are on the product data sheet, so check them against your ink specification before ordering.
When would I use n-propyl acetate instead of ethyl acetate?
n-Propyl acetate is a slightly slower ester than ethyl acetate, which can help where an ink dries too fast on the press. It is listed on this site for flexo and gravure inks. We supply Technical Grade. Which one suits your press is a trial question, and the product page has the data sheet.
What does butyl acetate do in a printing ink solvent blend?
n-Butyl acetate evaporates much more slowly than ethyl acetate, so it gives the film time to flow and level and helps avoid drying in the cells or on the plate. We supply Solvent Grade, with the grade stated per the data sheet as ASTM D4615.
What role does IPA play in flexo and roto inks and in cleaning?
IPA is a fast-evaporating alcohol. Printers and ink makers use it as a co-solvent, for viscosity adjustment, and for wiping rollers and plates. We supply Technical grade. The IP (pharmacopoeia) grade is a separate grade with its own data sheet and is not needed for inks.
Is toluene still used in rotogravure inks, and what should I check?
Toluene is named as an ink solvent in our product data and is used in rotogravure for its resin dissolving power. Some end uses, such as food-contact packaging, limit residual solvents, so check your customer's requirements and local rules before choosing an aromatic. We supply industrial and technical grade toluene.
What should a flexo or roto buyer specify when asking for a quote?
Send the solvent and CAS number, the grade and the purity and water limits you need, the packing (drum, IBC or bulk tanker, as shown on the product page), the quantity, whether you need the TDS and SDS, and your delivery location. Check the batch Certificate of Analysis against your incoming-inspection limits. We quote within 4 working hours.
Do you supply technical-grade solvents only, or food and pharma grade too?
The solvents on this page are technical or industrial grade for ink and coating use. A technical grade is not a food or pharma grade. If your packaging customer needs a specific compliance statement, tell us before you order and we will check what the product documents support.
Deep guidesEthyl acetate for ink makers: uses and bulk sourcingEthyl acetate CAS 141-78-6 specification and TDSToluene vs mixed xylene: choosing an aromatic solventIPA grades and uses: technical vs IP gradeMEK vs MIBK vs acetone: ketone solvent selection
Sourcing chemicals for flexo & roto printing?
Tell us your requirement — product, quantity, and frequency. We respond within 4 working hours with pricing and availability.