Every role in the process, mapped.
Aromatic feedstocks and intermediates
Source: SPC product specifications, 2026-10. Grades are technical or industrial. In general chemistry, benzene, toluene and the xylene isomers are the basic aromatic building blocks; nitrobenzene, phenol and styrene are widely used intermediates and monomers downstream of them. SPC is an importer and bulk distributor; we do not make these chemicals or their end products. Meta-xylene HSN code on request.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Benzene | Refinery Grade (IS 534:2007) | 99.9% mass min (IS 534:2007) | 71-43-2 | Bulk road tanker |
| Toluene | Industrial / Technical / Nitration grade | 99.5% min (GC) | 108-88-3 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Mixed Xylene | Industrial / Technical | ≥ 98.5% (xylene isomers + ethylbenzene) | 1330-20-7 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Ortho Xylene | Petrochemical grade, 98.5% min | 98.50 wt% min (o-Xylene) | 95-47-6 | Bulk road tanker |
| Meta Xylene | High-Purity (≥ 99%) | 99.0 % wt min (m-Xylene) | 108-38-3 | ISO tank / bulk, Drums on enquiry |
| Nitro Benzene | Industrial Grade (GC, 99.9% min) | 99.9 % mass min by GC; Benzene 0.05 % mass max; others balance | 98-95-3 | Drums, Tanker |
| Phenol (Liquid / Crystal) | IS 538:2020, Min 99.80% | 99.80 % wt min (IS 538:2020) | 108-95-2 | Bulk road tanker |
| Styrene Monomer | Polymer grade, TBC-inhibited | 99.7 % m/m min (Styrene) | 100-42-5 | Bulk tanker, Drums |
Reaction and process solvents
Source: SPC product specifications, 2026-10. Grades are technical or industrial. The medium a reaction or purification step is run in. In general chemistry, toluene suits reflux and azeotropic drying (boiling point 110.6°C per the toluene spec), cyclohexane is a low-polarity saturated hydrocarbon and cyclohexanone a ketone solvent. Choose by boiling range, polarity and what must be removed afterwards.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Cyclo Hexane | Solvent Grade (caprolactam-route) | 98.0% mass min (cyclohexane content) | 110-82-7 | 200 L / 160 kg mild steel drum, Bulk road tanker |
| Cyclo Hexanone | Industrial Grade, Min 99.5% | Min 99.5% | 108-94-1 | 180 kg MS drums, Bulk tanker |
Extraction, washing and clean-down
Source: SPC product specifications, 2026-10. Lower-boiling solvents used to wash product, extract or crystallise, and to clean reactors, lines and filters between batches (general practice). Grades are as listed per product. A technical or industrial grade is not a food or pharma grade; only the IPA row lists an IP (Indian Pharmacopoeia) grade.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Acetone | Industrial / Technical | 99.5% min (GC) | 67-64-1 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Isopropyl Alcohol (IPA) | Technical (99.8% min GC) / IP (Indian Pharmacopoeia, 99.0% v/v min) | 99.8% min (GC) | 67-63-0 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Methylene Di Chloride (MDC) | Technical Grade, stabilised (min. 99.95% GC) | 99.95% min (GC), stabilised | 75-09-2 | 250 kg MS barrel, 1000L IBC tank, Bulk tanker (ISO) |
| Ethyl Acetate | Commercial / Industrial Grade — 99.80% min purity | Ethyl acetate content 99.80% w/w min | 141-78-6 | Bulk tankers |
Figures are the grades and specifications we supply, as published on each product page. A batch Certificate of Analysis carries the exact numbers.
48 chemicals for aromatic
Toluene
CAS 108-88-3Benzene
CAS 71-43-22-Ethylhexyl Acrylate
CAS 103-11-72-Ethylhexyl Acetate
CAS 103-09-3Acetone
CAS 67-64-1Butyl Acrylate Monomer (BAM)
CAS 141-32-2Cyclo Hexane
CAS 110-82-7Cyclo Hexanone
CAS 108-94-1Di Methyl Formamide (DMF)
CAS 68-12-2Methyl Ethyl Ketone (MEK)
CAS 78-93-3Methyl Iso Butyl Ketone (MIBK)
CAS 108-10-1Mixed Xylene
CAS 1330-20-7Meta Xylene
CAS 108-38-3Nitro Benzene
CAS 98-95-3Octanol (2EH)
CAS 104-76-7Ortho Xylene
CAS 95-47-6Phenol (Liquid / Crystal)
CAS 108-95-2Styrene Monomer
CAS 100-42-5Vinyl Acetate Monomer (VAM)
CAS 108-05-4Acetonitrile
CAS 75-05-8Alkyd Resin
CAS 63148-69-6Caustic Soda Lye
CAS 1310-73-2Chloroform
CAS 67-66-3Cocamidopropyl Betaine (CAPB)
CAS 61789-40-0Coco Di — CDEA
CAS 68603-42-9Coco Mono — CMEA
CAS 68140-00-1Common Salt (Sodium Chloride)
CAS 7647-14-5Copper Sulphate
CAS 7758-99-8Di Pentene
CAS 138-86-3Formaldehyde
CAS 50-00-0Light / Heavy Liquid Paraffin (LLP / HLP)
CAS 8012-95-1Linear Alkyl Benzene (LAB)
CAS 67774-74-7Liquor Ammonia
CAS 1336-21-6Mineral Turpentine Oil (MTO)
CAS 8052-41-3Mono Sodium Glutamate (MSG)
CAS 6106-04-3Morpholine
CAS 110-91-8Paraffin Wax (Hard / Light)
CAS 8002-74-2Pine Oil (22% / 32% / 42%)
CAS 8002-09-3Silicone Emulsion / Oil
CAS 63148-62-9SLES Liquid / Paste
CAS 68585-34-2Sorbitol
CAS 50-70-4Thinners
Tween 20 (Polysorbate 20)
CAS 9005-64-5Tween 80 (Polysorbate 80)
CAS 9005-65-6Urea
CAS 57-13-6White Petroleum Jelly
CAS 8009-03-8Sodium Sulphite
CAS 7757-83-7Zinc Oxide
CAS 1314-13-2Frequently Asked Questions
What does Supreme Petro Chemicals supply to aromatic manufacturers, and do you manufacture it?
We supply benzene, toluene, mixed xylene, ortho- and meta-xylene, nitrobenzene, phenol and styrene monomer, plus acetone, isopropyl alcohol, methylene dichloride and ethyl acetate for washing and extraction. We are a trader, importer and bulk distributor in Chennai, not a manufacturer. Head office is at Periyamet and the warehouse at Redhills. We quote within 4 working hours.
Is this the page for fragrance and flavour aromatics?
No. Here, aromatic means aromatic hydrocarbon chemistry: benzene, toluene, xylenes and the intermediates built on them. Fragrance and cosmetic raw materials are on the Perfumery / Cosmetics industry page (/industries/perfumery-cosmetics). Our listed grades here are industrial or technical, and a technical grade is not a food or pharma grade.
Which toluene grades do you list, and what is the assay?
Toluene is listed as Industrial, Technical and Nitration grade, assay 99.5% min by GC, in 200 L mild steel barrels, 1000 L IBC tanks or bulk tanker. It is UN 1294, Class 3, Packing Group II. Only the nitration grade has a downloadable technical data sheet; the safety data sheet downloads from the product page.
How do toluene and mixed xylene differ for solvent selection?
On our specifications toluene boils at 110.6°C with a 4°C closed-cup flash point; mixed xylene boils at 137 to 144°C with a 25°C flash point, so it evaporates more slowly. Mixed xylene is an isomer blend with ethylbenzene, so the split can vary by batch. See the toluene versus mixed xylene guide (/blog/toluene-vs-mixed-xylene-aromatic-solvent-selection).
What is the difference between mixed, ortho and meta xylene?
Mixed xylene (CAS 1330-20-7) is a blend of xylene isomers and ethylbenzene, listed as Industrial or Technical grade, 98.5% or more. Ortho-xylene is petrochemical grade, 98.5% wt min, in bulk road tanker. Meta-xylene is high-purity, 99.0% wt min, imported from Mitsubishi Gas Chemical, in ISO tank or bulk, with drums on enquiry.
What handling limits apply to benzene, nitrobenzene and phenol?
Our safety data sheets set the limits. Benzene (UN 1114, Class 3) is industrial use only, with carcinogenic exposure controls required. Nitrobenzene (UN 1662, Class 6.1) and phenol (Class 6.1) are industrial or professional use only. Read the SDS on each product page before ordering, and confirm your end use is industrial.
Which HSN codes apply to the main aromatic hydrocarbons?
Benzene 2902 20 00, toluene 2902 30 00, ortho-xylene 2902 41 00, mixed xylene 2902 44 00 and styrene monomer 2902 50 00. Meta-xylene code on request. We publish no duty or tax rates; confirm classification for your own filing.
What should I check before ordering a solvent or feedstock?
Check the grade against your end use first, because a technical or industrial grade is not a food or pharma grade. Then check the assay and the limits that matter to your process, the pack format, and the UN number and hazard class for transport. Safety data sheets download from each product page.
How do I order, and what documents come with a delivery?
We do not publish prices, because chemical prices move with the market. Send the product, grade, pack format and delivery location and we quote within 4 working hours. A batch Certificate of Analysis is supplied with every delivery, and safety data sheets, and technical data sheets where one exists, download from each product page.
Deep guidesToluene vs mixed xylene: choosing an aromatic solventPerfumery / Cosmetics: fragrance and cosmetic raw materials
Sourcing chemicals for aromatic?
Tell us your requirement — product, quantity, and frequency. We respond within 4 working hours with pricing and availability.