Every role in the formulation, supplied.
Stage 1 - Reaction and synthesis solvents
The medium the step is run in. Toluene is the non-polar aromatic for reflux and azeotropic drying, boiling at 110.6°C; DMF and acetonitrile are the polar aprotic solvents that keep salts and polar intermediates in solution; cyclohexane is the inert low-polarity hydrocarbon, supplied as caprolactam-route Solvent Grade. Toluene is domestic supply; acetonitrile lands in steel drums and DMF in ISO tanks, both imported. General knowledge, not an SPC claim: under the ICH Q3C residual-solvent guideline, toluene, acetonitrile, DMF and cyclohexane are Class 2 solvents whose residue in the finished drug substance is limited, so confirm with your regulatory team before fixing a solvent for a late-stage step.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Toluene | Industrial / Technical / Nitration grade | 99.5% min (GC) | 108-88-3 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Di Methyl Formamide (DMF) | Industrial Grade, 99.8% min | Dimethyl Formamide content 99.8 % wt min | 68-12-2 | Bulk in ISO tank containers (imported) |
| Acetonitrile | Industrial / synthesis grade (99.9% min) | 99.9% min (% mass) | 75-05-8 | 200 L steel drums |
| Cyclo Hexane | Solvent Grade (caprolactam-route) | 98.0% mass min (cyclohexane content) | 110-82-7 | 200 L / 160 kg mild steel drum, Bulk road tanker |
Stage 2 - Extraction, crystallisation and recovery solvents
Pulling the product out of the reaction mass, then crystallising and washing it. Boiling point decides how easily a solvent strips back off — MDC at 39.6°C, acetone at 56.05°C and chloroform at 61.2°C come off low; IPA at 82.5°C and MIBK (initial boiling point Min 114.0 °C) sit higher. IPA is also supplied in Indian Pharmacopoeia (IP) grade and chloroform in Pharma (IP/BP/USP) grade. General knowledge, not an SPC claim: under ICH Q3C, MDC and chloroform are Class 2 solvents with limited residue, while acetone, ethyl acetate, IPA and MIBK are Class 3, low-toxic-potential solvents, which is one reason Class 3 solvents are often preferred for final crystallisation and washing. The grade of each line here is the grade in the table; confirm the pharmacopoeia and edition per order.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Methylene Di Chloride (MDC) | Technical (stabilised) | 99.95% min (GC) | 75-09-2 | 250 kg MS barrel, 1000L IBC tank, Bulk tanker (ISO) |
| Acetone | Industrial / Technical | 99.5% min (GC) | 67-64-1 | 160 kg MS drum, 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Isopropyl Alcohol (IPA) | Technical / IP (Indian Pharmacopoeia) | 99.8% min (GC) technical; 99.0% v/v min IP | 67-63-0 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Methyl Iso Butyl Ketone (MIBK) | Technical Grade, Min 99.5% | Min 99.5 wt % | 108-10-1 | 160 kg HDPE/MS drums |
| Ethyl Acetate | Commercial / Industrial Grade — 99.80% min purity | Ethyl acetate content 99.80% w/w min | 141-78-6 | Bulk tankers (dedicated cleaned tankers, ~20 MT loads) |
| Chloroform | Technical / Pharma (IP/BP/USP) | ≥ 99.0% (technical); ≥ 99.5% (pharma) | 67-66-3 | 40 kg HDPE jerry can, 200L MS barrel |
Stage 3 - pH control, salt formation and workup reagents
Acids and alkalis for pH adjustment, salt formation, quenching and washing. These are process reagents in commercial and technical grades, not pharmacopoeial lines. Hydrochloric acid and caustic soda lye are the bulk pH pair; acetic acid and its sodium salt are the acetate buffer pair. Caustic soda lye is IS 252:2013 Grade-1 under BIS licence CM/L-6100076189, bulk road tanker only.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Acetic Acid | Industrial / Technical / Glacial (≥99.8%) / Food grade | 99.8% min | 64-19-7 | 200L HDPE barrel, 35L HDPE carboy, 1000L IBC tank, Bulk tanker |
| Hydrochloric Acid (HCL) | Commercial (30%) / Technical (33%) / Synthetic (35%) | 30% min (commercial grade) | 7647-01-0 | 35 kg HDPE carboy, 200L HDPE barrel, 1000L HDPE IBC, Bulk rubber-lined tanker |
| Caustic Soda Lye | IS 252:2013 Grade-1 (BIS CM/L-6100076189) | 47% min NaOH (as NaOH, by mass) | 1310-73-2 | Bulk road tanker |
| Sodium Acetate | Trihydrate, Commercial Grade | 99.0% mass min (as CH3COONa·3H2O) | 6131-90-4 | 25 kg HDPE bags |
Stage 4 - Excipients and formulation carriers
The carriers, diluents and preservatives that go into the dosage form rather than the synthesis. Propylene glycol is supplied to the IP/USP/BP/EP monographs, glycerin on one certificate covering USP, BP and EP (tested to USP-NF 2026), sorbitol as Non-Crystallizing IP, polyethylene glycol (PEG-400) on IP and USP data sheets and sodium benzoate to IP-2022 Amendment 2024. General knowledge, not an SPC claim: glycerine and propylene glycol act as solvents and humectants in oral liquids, sorbitol as a sweetening and bulking vehicle, PEG as a solvent and base, and sodium benzoate as a preservative. This is a short list on purpose: the full pharmacopoeial list, with makes and pack sizes, is on our Food & Pharma Grade page.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Propylene Glycol (PG) | Pharmacopoeial (IP/USP/BP/EP) | NLT 99.5% w/v (as C3H8O2, by GLC) | 57-55-6 | HDPE/MS drums, 215 kg net |
| Glycerine (Refined, IP) | IP (Indian Pharmacopoeia 2022) | 98.0 – 101.0 % (anhydrous basis) | 56-81-5 | 250 kg HDPE drums |
| Glycerin USP | USP / BP / EP - one certificate, tested to USP-NF 2026 | 99.0 - 101.0 % (anhydrous basis); batch tested 100.21 % | 56-81-5 | 250 kg new HDPE drums |
| Sorbitol | Non-Crystallizing IP — conforms to Indian Pharmacopoeia | 68.0 – 72.0 % (anhydrous substance); D-Glucitol 91.0 – 99.0 % on anhydrous basis | 50-70-4 | 300 kg HDPE drums, Bulk road tanker |
| Sodium Benzoate | IP (per IP-2022, Amendment 2024) | 99.0 – 101.0% (on dried basis, HPLC) | 532-32-1 | 25 kg bags |
| PEG 200 / 400 / 600 / 2000 / 3350 / 4000 / 6000 | PEG-400: IP / pharmacopoeial and USP; PEG-3350: USP | PEG-400 (IP line): average molecular weight 380.0 – 420.0, hydroxyl value 265.0 – 295.0 mg KOH/g; PEG-400 (USP line): assay 95.0 – 105.0 % | 25322-68-3 | HDPE drums (PEG-400); other grades as per order |
Figures are the grades and specifications we supply, as published on each product page. A batch Certificate of Analysis carries the exact numbers.
57 chemicals for pharma
Isopropyl Alcohol (IPA)
CAS 67-63-0Glycerine
CAS 56-81-5PEG 200 / 400 / 600 / 2000 / 3350 / 4000 / 6000
CAS 25322-68-3Methylene Di Chloride (MDC)
CAS 75-09-2Acetic Acid
CAS 64-19-7Acid Slurry
CAS 27176-87-0Acid Thickener
Acrylic Acid
CAS 79-10-7Alphox 200
CAS 9016-45-9Benzoic Acid
CAS 65-85-0Boric Acid
CAS 10043-35-3Chromic Acid
CAS 1333-82-0Citric Acid Anhydrous
CAS 77-92-9Citric Acid Monohydrate
CAS 5949-29-1Formic Acid
CAS 64-18-6Fumaric Acid
CAS 110-17-8Hydrochloric Acid (HCL)
CAS 7647-01-0Hydrogen Peroxide
CAS 7722-84-1Nitric Acid
CAS 7697-37-2Oleic Acid
CAS 112-80-1Oxalic Acid
CAS 6153-56-6Phosphoric Acid
CAS 7664-38-2Sulphuric Acid
CAS 7664-93-9Benzyl Alcohol
CAS 100-51-6Butanol (NBA)
CAS 71-36-3Butyl Acetate
CAS 123-86-4Butyl Carbitol
CAS 112-34-5Butyl Cellosolve (Glycol)
CAS 111-76-2Butyl Cellosolve Acetate
CAS 112-07-2Di Ethanol Amine (DEA)
CAS 111-42-2Di Methyl Amine (DMA)
CAS 124-40-3Diacetone Alcohol
CAS 123-42-2Ethyl Acetate
CAS 141-78-6Ethyl Cellosolve
CAS 110-80-5Ethyl Cellosolve Acetate
CAS 111-15-9Glycerin USP
CAS 56-81-5Glycerol Mono Stearate (GMS)
CAS 31566-31-1Hexane (Food Grade)
CAS 110-54-3Iso-Butanol
CAS 78-83-1Maleic Anhydride
CAS 108-31-6Phthalic Anhydride
CAS 85-44-9Mono Ethanol Amine (MEA)
CAS 141-43-5N-Propanol
CAS 71-23-8N-Propyl Acetate
CAS 109-60-4Tri Ethanol Amine (TEA) 85%/99%
CAS 102-71-6Diethylene Glycol (DEG)
CAS 111-46-6Dipropylene Glycol (DPG)
CAS 25265-71-8Mono Ethylene Glycol (MEG)
CAS 107-21-1Propylene Glycol (PG)
CAS 57-55-6Propylene Glycol Methyl Ether Acetate (PGMEA)
CAS 108-65-6Methoxy Propanol (PGMME)
CAS 107-98-2Chlorinated Paraffin Wax (CPW)
CAS 63449-39-8Di Butyl Phthalate (DBP)
CAS 84-74-2Di Ethyl Phthalate (DEP)
CAS 84-66-2Di Octyl Maleate (DOM)
CAS 142-16-5Di Octyl Phthalate (DOP)
CAS 117-81-7Di Octyl Terephthalate (DOTP)
CAS 6422-86-2Frequently Asked Questions
Which solvents do you supply for API manufacture?
We supply the reaction and recovery slate at our Redhills, Chennai warehouse: toluene (99.5% min by GC), acetonitrile (99.9% min by mass), DMF (99.8 % wt min), cyclohexane (98.0% mass min), MDC (99.95% min by GC, technical, stabilised), ethyl acetate (99.80% w/w min), acetone (99.5% min by GC), IPA (99.8% min by GC, technical), MIBK (Min 99.5 wt %) and chloroform (≥ 99.0% technical, ≥ 99.5% pharma). The map above sets out which one does which unit operation.
Which grade of MDC do you supply for pharmaceutical extraction?
Methylene Di Chloride (MDC) — CAS 75-09-2, also traded as dichloromethane or DCM — is supplied as Technical Grade (stabilised) at 99.95% min assay by GC per the product TDS. Name the grade on the enquiry; the batch Certificate of Analysis carries the exact figure. Packing, hazard classification and the TDS and SDS downloads are on the MDC product page; our MDC buyer guide covers the wider sourcing picture.
What is the difference between your industrial and pharmacopoeial lines of the same solvent?
The molecule is the same. The grade is the standard the batch is certified against and the paperwork that travels with it. IPA is supplied as Technical (99.8% min by GC) and IP (Indian Pharmacopoeia) grade; acetone as Industrial and Technical; chloroform as Technical and Pharma (IP/BP/USP); MDC as Technical Grade (stabilised). Name the pharmacopoeia and the edition on your enquiry — grade is confirmed per order, not assumed. Our IP / BP / USP grade guide explains what each standard means on a certificate.
Do you supply glycerine in IP, BP, EP and USP?
Yes, across two lines. Glycerine (IP) is domestic Indian Pharmacopoeia 2022 material from Godrej Industries Limited and Kaleesuwari Refinery, assay 98.0 – 101.0 % on the anhydrous basis, Halal certified, in 250 kg HDPE drums. Glycerin USP is imported Vance Bioenergy material, assay 99.0 - 101.0 % on the anhydrous basis in 250 kg new HDPE drums, and one Certificate of Analysis certifies that batch to the USP, BP and EP glycerin monographs - every test on it run to USP-NF 2026 methods, so the numeric limits are the USP-NF ones as tested. Name the pharmacopoeia and the edition on your enquiry and we will confirm what the producing plant can certify before you raise the order. The rest of the pharmacopoeial range, with makes and packing, is on our Food & Pharma Grade page.
Can one enquiry cover solvents and excipients together?
Yes. Solvents, acids, alkalis and excipients can be quoted together as one enquiry, and we quote within 4 working hours. Use the map above for what each material does in the plant, and the Food & Pharma Grade page for the pharmacopoeial list with CAS, packing and makes.
Does SPC make pharmaceutical products?
No. SPC is a trader and bulk distributor. We supply chemicals for pharmaceutical manufacturers: solvents, acids and alkalis, and excipients that go into your API or dosage-form process. We do not make medicines, APIs or finished dosage forms, and we do not make the chemicals we supply; the producing plant certifies the batch.
What should a pharma buyer put in a chemical enquiry?
Send the product name and CAS number, the grade and pharmacopoeia with edition (for example IP 2022 or USP-NF 2026), the pack type you can receive (drum, IBC or bulk tanker), the delivery location and the documents your quality team needs. Also say whether the material enters the synthesis or the dosage form, because that decides whether a technical grade or a pharmacopoeial line applies. We quote within 4 working hours.
Is technical-grade solvent the same as pharma grade?
No. The molecule is the same, but a technical grade is certified to a technical specification, not to a pharmacopoeial monograph. For example, our MDC is Technical Grade (stabilised, 99.95% min by GC) and our acetone is Industrial or Technical. IPA and chloroform are the lines that also carry a pharmacopoeial grade (IP, and IP/BP/USP respectively). Never assume a technical grade can substitute where your registered process names a pharmacopoeial one.
Which Indian Pharmacopoeia lines do you supply?
Our IP-referenced lines are IPA in IP grade (99.0% v/v min), glycerine to Indian Pharmacopoeia 2022 (98.0 - 101.0 % on the anhydrous basis), sorbitol as Non-Crystallizing IP, sodium benzoate to IP-2022 Amendment 2024 and PEG-400 on an IP data sheet. Name the edition on your enquiry and we will confirm what the producing plant can certify before you raise the order.
What are residual solvent classes and why do they matter when choosing a solvent?
Under the ICH Q3C guideline, residual solvents are grouped by toxicity. As general knowledge, not an SPC claim: toluene, acetonitrile, DMF, cyclohexane, chloroform and MDC are Class 2 (limited residue), while acetone, ethyl acetate, IPA and MIBK are Class 3 (lower toxic potential). Benzene is a Class 1 solvent that should be avoided in drug manufacture. Your regulatory team sets the solvent for a registered process; we supply the material you specify.
Why is toluene, acetone or IPA used in a pharma plant?
As general knowledge, not an SPC claim: toluene is a non-polar reaction and azeotropic-drying solvent; acetone and IPA are low-boiling solvents used to dissolve, wash and crystallise, and IPA is also used to clean surfaces and equipment. Boiling points from our specifications: toluene 110.6°C, acetone 56.05°C, IPA 82.5°C, so acetone strips off most easily.
Which pH reagents do you supply for workup and salt formation?
Hydrochloric acid (Commercial 30%, Technical 33%, Synthetic 35%), acetic acid (Industrial, Technical, Glacial at 99.8% min or Food grade), caustic soda lye (IS 252:2013 Grade-1, 47% min NaOH, bulk road tanker) and sodium acetate trihydrate (Commercial Grade, 99.0% mass min). These are commercial and technical grades, not pharmacopoeial lines.
What documents come with a delivery?
A batch Certificate of Analysis is supplied with every delivery. The Technical Data Sheet and Safety Data Sheet for each product are on its product page. Tell us on the enquiry if your quality team needs a specific pharmacopoeial edition, since the batch certificate states what the producing plant tested the lot to.
Which glycols and polyols do you supply as excipients?
Propylene glycol (Pharmacopoeial IP/USP/BP/EP, NLT 99.5% w/v by GLC, 215 kg net drums), glycerine IP, glycerin USP, sorbitol (Non-Crystallizing IP) and polyethylene glycol, with PEG-400 on IP and USP data sheets and PEG-3350 on a USP data sheet. Diethylene glycol (DEG) is industrial grade only and is not offered for pharmaceutical use.
Which glycerine do I need, IP or USP?
It depends on the pharmacopoeia in your registered dossier. Glycerine (IP) is Indian Pharmacopoeia 2022 material from Godrej Industries Limited and Kaleesuwari Refinery in 250 kg HDPE drums. Glycerin USP is imported from Vance Bioenergy, with one Certificate of Analysis covering USP, BP and EP, tested to USP-NF 2026. Choose by the monograph you file against, not by the price or the name.
Can I source chemicals for API synthesis and for the formulation from one supplier?
Yes, as one enquiry. The page above maps four stages: reaction solvents, extraction and recovery solvents, pH and workup reagents, and excipients. List the items you need at each stage and we quote the whole list within 4 working hours. Pack types and grades differ product by product, so confirm each on the product page.
Do you supply to pharma companies near Chennai only?
We trade from Chennai, with our head office in Periyamet and our warehouse at Redhills, and we supply pharmaceutical manufacturers across South India. Send the location on your enquiry and we confirm the pack and route for each product, with no promise of a delivery time before you have a quote.
Is the sorbitol and glycerine listed here food grade or pharma grade?
These are the pharmacopoeial lines in the table: sorbitol is Non-Crystallizing IP and glycerine is IP (2022) or USP. Technical grades of other products on this site are not food or pharma grade, so a technical grade must not be used where a monograph is specified. The Food and Pharma Grade page lists those pharmacopoeial lines separately.
Deep guidesFood & Pharma Grade listIP / BP / USP grade guideMDC buyer guidePropylene glycol: USP grade and pharma applicationsGlycerine: pharma, cosmetic and industrial gradesIPA grades and uses in India
Sourcing chemicals for pharma?
Tell us your requirement — product, quantity, and frequency. We respond within 4 working hours with pricing and availability.