Every role in the formulation, supplied.
Acid and anhydride building blocks
General knowledge: alkyd and unsaturated polyester resins are built by reacting an anhydride or diacid with a polyol. Phthalic anhydride gives the rigid aromatic backbone; maleic anhydride brings the double bond that is later cross-linked with a vinyl monomer such as styrene. We supply the chemicals; we do not make the resin.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Phthalic Anhydride | Technical (IS 5158:1987) | Total available acidity (as C8H4O3) 99.8% by mass min; crystallizing point 130.8 °C min (manufacturer specification, IS 5158 : 1987) | 85-44-9 | 25 kg bag |
| Maleic Anhydride | IS 5149:2020 | Per TDS and batch Certificate of Analysis | 108-31-6 | Per TDS |
| Ortho Xylene | Petrochemical grade, 98.5% min | 98.50 wt% min o-Xylene (per Reliance Industries Certificate of Quality) | 95-47-6 | Bulk road tanker |
Polyols and glycols
General knowledge: the polyol is the other half of the polyester reaction. Glycerol is the classic polyol for alkyds; glycols such as MEG are used in unsaturated polyester. Check which glycerine grade your process needs: the technical grade is for industrial use only.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Glycerine (refined) | Refined / Technical (industrial use only); IP grade also listed | Glycerol content 98.0% min (technical grade TDS); IP grade assay 98.0 – 101.0 % (anhydrous basis) | 56-81-5 | 250 kg HDPE drums |
| Mono Ethylene Glycol (MEG) | Fibre grade / Industrial grade / Antifreeze grade | ≥ 99.9% (fibre grade) | 107-21-1 | 230 kg HDPE barrel, 1000L IBC tank, Bulk tanker |
Reactive monomer and curing initiator
General knowledge: styrene is the reactive diluent that cross-links with the maleate double bonds when unsaturated polyester resin cures, and a peroxide initiator starts that cure. Styrene is an inhibited monomer; follow the storage notes on its TDS and SDS.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Styrene Monomer | Polymer grade, TBC-inhibited | 99.7 % m/m min (Styrene) | 100-42-5 | Bulk tanker, Drums |
| Benzoyl Peroxide Powder (BPP) | Water-wetted, 75% (25% moisture) | 74 – 76 % by mass (Benzoyl Peroxide), manufacturer Certificate of Analysis | 94-36-0 | Net 25 kg HDPE-lined fibreboard keg, Net 25 kg carton |
Phenolic and amino-resin feedstocks
General knowledge: phenolic resins come from phenol reacted with formaldehyde; melamine-formaldehyde resins from melamine and formaldehyde. Paraformaldehyde is a solid formaldehyde source. These resins are used for laminates, plywood and board adhesives, and moulding powders.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Phenol (Liquid / Crystal) | IS 538:2020, Min 99.80% | 99.80 % wt min (IS 538:2020); crystallizing point 40.3 °C min | 108-95-2 | Bulk road tanker |
| Paraformaldehyde | 96% Paraformaldehyde, free-flowing prills | 95.0% min (aldehyde content as HCHO); moisture 1.0% max | 30525-89-4 | 25 kg bags on pallets |
| Melamine | Grade A, GB/T9567-2016 | 99.50% min; moisture 0.1% max | 108-78-1 | 25 kg bags |
Cut-back and dilution solvents
General knowledge: finished resin solutions are thinned to working viscosity. Aromatic hydrocarbons dissolve alkyds well; ketones and esters suit faster-drying systems. Evaporation follows boiling point, so read SDS section 9 for each solvent (n-butyl acetate is listed at 126 °C there; no boiling point is published for ethyl acetate in our product data). Grades and specifications on this page come from SPC product data sheets (TDS) and manufacturer certificates of quality.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Toluene | Industrial / Technical / Nitration grade | 99.5% min (GC) | 108-88-3 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Mixed Xylene | Industrial / Technical | ≥ 98.5% (xylene isomers + ethylbenzene) | 1330-20-7 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Acetone | Industrial / Technical | 99.5% min (GC) | 67-64-1 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Ethyl Acetate | Commercial / Industrial Grade, 99.80% min purity | Ethyl acetate content 99.80% w/w min | 141-78-6 | Bulk tankers (dedicated cleaned tankers) |
| Butyl Acetate | Solvent Grade (grade per TDS: ASTM D4615) | n-Butyl Acetate 99.5 % w/w min; water 0.10 % w/w max | 123-86-4 | Bulk road tanker, HDPE drums, MS drums |
| Cyclo Hexanone | Industrial Grade, Min 99.5% | Min 99.5% | 108-94-1 | 180 kg MS drums, Bulk tanker |
Finished alkyd resin (third-party make)
We are a trader, not a resin maker. One finished alkyd resin made by a third-party manufacturer is in our catalogue for buyers who want a ready resin rather than raw materials. See the product page for the data sheet.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Alkyd Resin | Medium-oil soya modified alkyd | Per TDS and batch Certificate of Analysis | 63148-69-6 | 225 kg MS drums |
Figures are the grades and specifications we supply, as published on each product page. A batch Certificate of Analysis carries the exact numbers.
51 chemicals for resins
Ethyl Acetate
CAS 141-78-6Acetone
CAS 67-64-1Glycerine
CAS 56-81-5Benzyl Alcohol
CAS 100-51-6Butanol (NBA)
CAS 71-36-3Butyl Acetate
CAS 123-86-4Butyl Carbitol
CAS 112-34-5Butyl Cellosolve (Glycol)
CAS 111-76-2Butyl Cellosolve Acetate
CAS 112-07-2Di Ethanol Amine (DEA)
CAS 111-42-2Di Methyl Amine (DMA)
CAS 124-40-3Diacetone Alcohol
CAS 123-42-2Ethyl Cellosolve
CAS 110-80-5Ethyl Cellosolve Acetate
CAS 111-15-9Glycerin USP
CAS 56-81-5Glycerol Mono Stearate (GMS)
CAS 31566-31-1Hexane (Food Grade)
CAS 110-54-3Iso-Butanol
CAS 78-83-1Isopropyl Alcohol (IPA)
CAS 67-63-0Maleic Anhydride
CAS 108-31-6Phthalic Anhydride
CAS 85-44-9Mono Ethanol Amine (MEA)
CAS 141-43-5N-Propanol
CAS 71-23-8N-Propyl Acetate
CAS 109-60-4Tri Ethanol Amine (TEA) 85%/99%
CAS 102-71-62-Ethylhexyl Acrylate
CAS 103-11-72-Ethylhexyl Acetate
CAS 103-09-3Benzene
CAS 71-43-2Butyl Acrylate Monomer (BAM)
CAS 141-32-2Cyclo Hexane
CAS 110-82-7Cyclo Hexanone
CAS 108-94-1Di Methyl Formamide (DMF)
CAS 68-12-2Methyl Ethyl Ketone (MEK)
CAS 78-93-3Methyl Iso Butyl Ketone (MIBK)
CAS 108-10-1Mixed Xylene
CAS 1330-20-7Meta Xylene
CAS 108-38-3Nitro Benzene
CAS 98-95-3Octanol (2EH)
CAS 104-76-7Ortho Xylene
CAS 95-47-6Phenol (Liquid / Crystal)
CAS 108-95-2Styrene Monomer
CAS 100-42-5Toluene
CAS 108-88-3Vinyl Acetate Monomer (VAM)
CAS 108-05-4Chlorinated Paraffin Wax (CPW)
CAS 63449-39-8Di Butyl Phthalate (DBP)
CAS 84-74-2Di Ethyl Phthalate (DEP)
CAS 84-66-2Di Octyl Maleate (DOM)
CAS 142-16-5Di Octyl Phthalate (DOP)
CAS 117-81-7Di Octyl Terephthalate (DOTP)
CAS 6422-86-2Methylene Di Chloride (MDC)
CAS 75-09-2Trichloroethylene (TCE)
CAS 79-01-6Frequently Asked Questions
Do you make resins?
No. Supreme Petro Chemicals is a trader, importer and bulk distributor in Chennai. We supply chemicals FOR resin manufacturers and do not make alkyd, polyester, phenolic or any other resin, or the anhydrides. We do trade one finished product, a medium-oil soya alkyd resin made by a third-party maker.
Which chemicals do alkyd resin makers buy from you?
The usual alkyd recipe combines an anhydride (phthalic anhydride), a polyol (glycerine) and a modifier, with an aromatic solvent such as toluene or mixed xylene for cut-back. We supply phthalic anhydride, glycerine, toluene and mixed xylene. The recipe is yours; the roles described are general chemistry.
Which chemicals are used for unsaturated polyester (FRP) resin?
In general, an unsaturated polyester combines maleic and phthalic anhydride with a glycol such as MEG, is diluted in styrene and cured with a peroxide initiator. We supply maleic anhydride, phthalic anhydride, mono ethylene glycol, styrene monomer and benzoyl peroxide powder (75% water-wetted). Formulation ratios depend on your resin and we do not publish them.
What grades of phthalic and maleic anhydride do you supply?
Phthalic anhydride is Technical Grade to IS 5158:1987 (total available acidity 99.8% by mass min, crystallizing point 130.8 °C min) in 25 kg bags. Maleic anhydride is supplied to IS 5149:2020; the TDS and the batch Certificate of Analysis carry the figures for your lot. Both are corrosive solids (UN 2214 and UN 2215, Class 8).
Is ortho xylene a solvent or a raw material?
It is a feedstock. Ortho xylene (98.50 wt% min o-Xylene, per the Reliance Industries Certificate of Quality) is the starting point of the phthalic anhydride chain, which leads to alkyd and unsaturated polyester resins. We supply it in bulk road tankers. For a general-purpose aromatic solvent, mixed xylene or toluene is the usual choice.
Which solvents are used to thin resin solutions?
It depends on the resin and drying speed. Toluene and mixed xylene are common aromatic cut-back solvents for alkyds; acetone, ethyl acetate and butyl acetate suit faster-drying systems; cyclo hexanone dissolves many resin systems. Trial any substitution in your own lab before changing a recipe, and ask for the SDS and batch CoA where the evaporation window is critical.
What do you supply for phenolic and melamine-formaldehyde resins?
For phenolic resins we supply phenol (IS 538:2020, 99.80 % wt min) in bulk road tanker and paraformaldehyde (96% prills) in 25 kg bags. For amino resins we supply melamine (Grade A, GB/T9567-2016, 99.50% min) in 25 kg bags. Phenol is toxic and corrosive, so request the SDS before handling.
Is your glycerine suitable for alkyd resin?
We list refined glycerine as an IP grade (Indian Pharmacopoeia 2022) and as a Refined / Technical grade for industrial use only (glycerol content 98.0% min), both in 250 kg HDPE drums. Either grade can be quoted; tell us which your process requires.
How do I get a quote, and what documents come with it?
Call or WhatsApp +91 86675 84068, or use the enquiry form, with the product, grade, quantity and delivery location. We quote within 4 working hours. A batch Certificate of Analysis is supplied with every delivery, and TDS and SDS are available on request. Read the SDS storage section first: the anhydrides must be kept dry, styrene is an inhibited monomer, and benzoyl peroxide is an organic peroxide (UN 3104, Class 5.2).
What should I check when qualifying a raw-material supplier?
A practical checklist: 1) the grade and the standard it is tested to; 2) the batch Certificate of Analysis for your lot, not a typical value; 3) the properties that affect your resin, such as colour, acidity, water content or inhibitor level; 4) how the pack protects against moisture; 5) the SDS for storage and transport class. We can share the TDS and SDS for the products on this page. We do not list an epoxy resin or its intermediates (epichlorohydrin, bisphenol-A); benzyl alcohol, used as an epoxy resin diluent, is listed.
Deep guidesOrtho xylene and the phthalic anhydride chainPaint and coating raw materials: grades and packagingBulk solvent table: grades and packagingEthyl acetate vs butyl acetate vs acetoneToluene vs mixed xylene: aromatic solvent selectionGlycerine grades: pharma, cosmetic and industrialAlkyd resin (third-party make): product page
Sourcing chemicals for resins?
Tell us your requirement — product, quantity, and frequency. We respond within 4 working hours with pricing and availability.