Every role in the formulation, supplied.
Rubber: activator and processing acids
General process knowledge, not an SPC specification: in a rubber mix the zinc oxide and a fatty acid are added together at the mixing stage to activate the cure system, and the fatty acid also helps the mix process. Your compounder sets the dosage; SPC supplies the material, not the formulation.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Zinc Oxide | Rubber Grade RT-4 (IS 9117 rubber-grade specification) | ZnO 99.0% min; BET surface area 3 - 10 m2/g; lead 0.005% max | 1314-13-2 | 25 kg bag |
| Stearic Acid | Triple Pressed (TPSA), Godrej Hystric; rubber and cosmetic grades listed | Acid value 205 - 210 mg KOH/g; titre 54 - 56 C; moisture 0.25% max; C16 and C18 fractions 45 - 55% each | 57-11-4 | 25 kg HDPE bags with LDPE liner |
| Oleic Acid | Industrial Grade (Lubolic 15), Godrej | Acid value 196 - 204 mg KOH/g; iodine value 85 - 95 g I2/100 g | 112-80-1 | 180 kg HDPE drums |
Rubber: plasticisers and flame-retardant plasticiser
General process knowledge: plasticisers soften the compound and ease processing, and chlorinated paraffin also adds flame resistance. Each of these three lists rubber compounding or processing among its applications on its product page; confirm compatibility with your polymer before trials.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Di Octyl Phthalate (DOP) | Kanatol-800, KLJ (primary plasticiser) | Ester content 99.50% wt min; specific gravity 0.980 - 0.986 at 27 C | 117-81-7 | 200 kg and 225 kg HDPE / MS drums; bulk road tanker (COA lots ex storage tank) |
| Di Butyl Phthalate (DBP) | Kanatol-400 (M), KLJ | Plasticising esters 99.50% min by GC (% by area) | 84-74-2 | MS drums (225 / 230 kg); bulk tankers (COA lots ex storage tank) |
| Chlorinated Paraffin Wax (CPW) | Liquid, about 52% chlorine (CPW-52) | Chlorine about 52%; specific gravity 1.400 +/- 0.02 at 27 C | 63449-39-8 | 250 kg HDPE drums |
Rubber: solvent and latex coagulants
General process knowledge: toluene is used as a solvent in rubber processing and adhesives, and dilute acid is used to coagulate natural rubber latex. Product pages list rubber processing (toluene) and latex coagulation (formic acid) as applications.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Toluene | Industrial, technical and nitration grades | 99.5% min (GC) | 108-88-3 | 200L MS barrels, 1000L IBC tanks, bulk road tankers |
| Formic Acid | Industrial Grade, GB/T 2093 (Luxi Chemical Group) | Purity 85% w/w min | 64-18-6 | 35 kg HDPE drums, IBC tanks |
Paper: pulping alkali, bleaching and process chemicals
General process knowledge: alkali is used to pulp and process the fibre, and peroxide is used in bleaching. Pulp and paper processing is a listed application of caustic soda and caustic soda lye, and paper bleaching of hydrogen peroxide.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Caustic Soda (flakes) | Technical, IS 252:2013 (Grasim Industries; Travancore-Cochin Chemicals) | NaOH 97.0% mass min per TDS | 1310-73-2 | 50 kg HDPE bags |
| Caustic Soda Lye | IS 252:2013 Grade-1 (Tamilnadu Petroproducts) | NaOH solution 47% min | 1310-73-2 | Bulk road tanker |
| Hydrogen Peroxide | 35% w/w (commercial) and 50% w/w (technical) | 35% / 50% w/w | — | 35 kg HDPE carboy, 70 kg and 200 kg HDPE barrels, 1000L HDPE IBC |
Paper: starch, adhesive and pigment inputs
General process knowledge: starch is used for sizing and as a binder, silicate and starch are used in corrugated board adhesives, and white pigment is used as a filler or coating component. Product pages list paper and corrugation adhesives (maize starch, sodium silicate) and paper and laminates (titanium dioxide).
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Maize Starch | Industrial Grade (BAPL-10-4-04), Bluecraft Agro | Starch content 98.0% min; moisture 14.0% max | 9005-25-8 | 25 kg and 50 kg bags |
| Sodium Silicate | Commercial Grade, ratio about 2.0:1 (GACL) | SiO2:Na2O ratio 1.95 - 2.10; total solids 44 - 47% mass | — | Carboys; road tanker (bulk) |
| Titanium Dioxide (Rutile) | KEMOX RC-822, KMML | TiO2 93.0% min; rutile 99.0% min | 13463-67-7 | 25 kg bags |
Figures are the grades and specifications we supply, as published on each product page. A batch Certificate of Analysis carries the exact numbers.
69 chemicals for rubber / paper
Benzyl Alcohol
CAS 100-51-6Butanol (NBA)
CAS 71-36-3Butyl Acetate
CAS 123-86-4Butyl Carbitol
CAS 112-34-5Butyl Cellosolve (Glycol)
CAS 111-76-2Butyl Cellosolve Acetate
CAS 112-07-2Di Ethanol Amine (DEA)
CAS 111-42-2Di Methyl Amine (DMA)
CAS 124-40-3Diacetone Alcohol
CAS 123-42-2Ethyl Acetate
CAS 141-78-6Ethyl Cellosolve
CAS 110-80-5Ethyl Cellosolve Acetate
CAS 111-15-9Glycerine
CAS 56-81-5Glycerin USP
CAS 56-81-5Glycerol Mono Stearate (GMS)
CAS 31566-31-1Hexane (Food Grade)
CAS 110-54-3Iso-Butanol
CAS 78-83-1Isopropyl Alcohol (IPA)
CAS 67-63-0Maleic Anhydride
CAS 108-31-6Phthalic Anhydride
CAS 85-44-9Mono Ethanol Amine (MEA)
CAS 141-43-5N-Propanol
CAS 71-23-8N-Propyl Acetate
CAS 109-60-4Tri Ethanol Amine (TEA) 85%/99%
CAS 102-71-6Chlorinated Paraffin Wax (CPW)
CAS 63449-39-8Di Butyl Phthalate (DBP)
CAS 84-74-2Di Ethyl Phthalate (DEP)
CAS 84-66-2Di Octyl Maleate (DOM)
CAS 142-16-5Di Octyl Phthalate (DOP)
CAS 117-81-7Di Octyl Terephthalate (DOTP)
CAS 6422-86-2Methylene Di Chloride (MDC)
CAS 75-09-2Trichloroethylene (TCE)
CAS 79-01-6AOS (Paste / Liquid / Powder)
CAS 68439-57-6Benzoyl Peroxide Powder (BPP)
CAS 94-36-0Bleaching Powder
CAS 7778-54-3Borax
CAS 1303-96-4Camphor
CAS 76-22-2Caustic Potash
CAS 1310-58-3Caustic Soda
CAS 1310-73-2Ceto Stearyl Alcohol
CAS 67762-27-0Cetyl Alcohol
CAS 36653-82-4CM-1000
EDTA — All Types
CAS 60-00-4Magnesium Nitrate
CAS 13446-18-9Maize Starch
CAS 9005-25-8Melamine
CAS 108-78-1Paraformaldehyde
CAS 30525-89-4SHMP
CAS 10124-56-8SLS Powder
CAS 151-21-3Soda Ash
CAS 497-19-8Sodium Acetate
CAS 6131-90-4Sodium Benzoate
CAS 532-32-1Sodium Bi Sulphate
CAS 7681-38-1Sodium Bi Sulphite
CAS 7631-90-5Sodium Bicarbonate
CAS 144-55-8Sodium Bromate
CAS 7789-38-0Sodium Di Chromate
CAS 10588-01-9Sodium Gluconate
CAS 527-07-1Sodium Ligno Sulphonate
CAS 8061-51-6Sodium Meta Bi Sulphite (SMBS)
CAS 7681-57-4Sodium Nitrate
CAS 7631-99-4Sodium Nitrite
CAS 7632-00-0Sodium Silicate
CAS 1344-09-8Sodium Sulphate
CAS 7757-82-6Stearic Acid
CAS 57-11-4STPP
CAS 7758-29-4Titanium Dioxide (Anatase / Rutile)
CAS 13463-67-7Trichloroisocyanuric Acid (TCCA)
CAS 87-90-1Xanthan Gum
CAS 11138-66-2Frequently Asked Questions
Do you manufacture rubber or paper, or only supply the chemicals?
We only supply chemicals. Supreme Petro Chemicals is a Chennai trader, importer and distributor, with its head office in Periyamet and warehouse at Redhills. We do not make tyres, rubber goods, paper or board. We supply the raw materials to the manufacturers who do.
Which chemicals do you supply for rubber compounding?
Rubber Grade RT-4 zinc oxide, triple pressed stearic acid, oleic acid, the plasticisers DOP, DBP and chlorinated paraffin wax (CPW-52), and toluene as a solvent. Each product page lists rubber compounding or processing among its applications. Formic acid and glacial acetic acid are listed for natural rubber latex coagulation.
What is the zinc oxide grade, and what does it do in a rubber mix?
In a rubber mix zinc oxide acts as a vulcanisation activator, which is general rubber chemistry. The grade we supply is Rubber Grade RT-4 to the manufacturer specification for IS 9117 rubber-grade zinc oxide: ZnO 99.0% min, specific surface area 3 - 10 m2/g, acidity 0.1% max as H2SO4, in 25 kg bags. Our technical data sheet names RA Chemicals as the maker.
What is triple pressed stearic acid, and is it pure C18?
No. The triple pressed grade is a stearic/palmitic blend, with the C16 and C18 fractions each 45 - 55% by mass per the manufacturer data sheet. Acid value is 205 - 210 mg KOH/g and titre 54 - 56 C. It is Godrej Hystric, supplied as white flakes or beads in 25 kg bags. It is used as a rubber compounding input, and the same page also lists soap, candle and cosmetic uses.
Which plasticisers can you supply for rubber, and what are their specifications?
DOP (Kanatol-800, KLJ) has ester content 99.50% wt min. DBP (Kanatol-400 M, KLJ) has plasticising esters 99.50% min by GC. CPW is a liquid of about 52% chlorine with specific gravity 1.400 +/- 0.02 at 27 C. Which one suits your polymer and end product is a compounding decision, so run your own trials. Ask for the technical data sheet before you do.
What do you supply for natural rubber latex coagulation?
Formic acid at 85% w/w min (Industrial Grade, GB/T 2093) in 35 kg HDPE drums and IBC tanks, and glacial acetic acid at 99.8% or above. Both product pages list rubber or latex coagulation as an application. Tell us the strength and pack you need and we quote within 4 working hours.
Which chemicals do paper mills and board makers buy from you?
Caustic soda flakes and caustic soda lye (pulp and paper processing), hydrogen peroxide (paper bleaching), maize starch (paper and corrugation adhesives), sodium silicate (paper and corrugated board adhesives), sodium sulphate (pulp and paper processing) and titanium dioxide (paper and laminates). EDTA is listed for pulp and paper bleaching, and vinyl acetate and butyl acrylate monomers for paper coatings.
Should I buy caustic soda flakes or caustic soda lye?
Flakes are the solid form: technical grade to IS 252:2013, NaOH 97.0% mass min per the data sheet, in 50 kg HDPE bags. Lye is the 47% min solution, IS 252:2013 Grade-1, supplied by bulk road tanker. Choose by your dosing system and tank capacity. Tell us which you need and we confirm the pack.
Are these food-grade or pharma-grade materials?
No. The grades on this page are industrial or technical unless a product page states otherwise, and technical grade is not food or pharma grade. If your paper or board is for food contact, check your own grade requirement before ordering and tell us what you need.
What documents come with a delivery?
A batch Certificate of Analysis is supplied with every delivery. Technical data sheets and safety data sheets are on the product pages. For example, zinc oxide is UN 3077 (Class 9), caustic soda flakes are UN 1823 (Class 8), and hydrogen peroxide is Class 5.1 with a corrosive subsidiary class (UN 2014).
How do I get a quote, and how quickly?
Send the product, grade, quantity and pack size through the contact form or WhatsApp, and we quote within 4 working hours. One enquiry can cover several chemicals, for example zinc oxide, stearic acid and DOP together.
Can you supply the plasticiser, the activator and the paper chemicals together?
Yes. They are all in one catalogue, supplied from our Redhills warehouse in Chennai across South India. List what you buy together in one enquiry and we quote it as one request.
Deep guidesZinc Oxide - Rubber Grade RT-4Stearic Acid - triple pressedChlorinated paraffin wax (CPW-52) - grades and usesDOP plasticiser guideCaustic soda - flakes and lye supplyAcetic acid, glacial (latex coagulation)
Sourcing chemicals for rubber / paper?
Tell us your requirement — product, quantity, and frequency. We respond within 4 working hours with pricing and availability.