Every role in the formulation, supplied.
Concrete admixture actives
Process stage: concrete batching. A set retarder slows early hydration and a water-reducing (plasticiser) base lets a mix reach workability at lower water content (general knowledge). Dose is set by your own trial mixes, which we do not specify. Source: product specification sheets, SPC.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Sodium Gluconate | Technical | 98.0 – 102.0% | 527-07-1 | 25 kg bags |
| Sodium Ligno Sulphonate | Concrete admixture grade | Technical powder grade: dry substance ≥ 95%; active matter ≥ 68%. Other grades to their own specification. | 8061-51-6 | 25 kg bags; 500–1200 kg FIBC |
| Melamine | Grade A, GB/T9567-2016 | 99.50% min | 108-78-1 | 25 kg bags |
Cement grinding-aid amines
Process stage: cement milling. Ethanolamines are used as grinding aids; both SPC product pages list cement grinding aids as an application. Confirm suitability in your own mill trials. Certifications shown on the TEA product page relate to its pharma and cosmetic grade, not to construction use. Source: product specification sheets, SPC.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Tri Ethanol Amine (TEA) | TEA 85% / TEA 99% | TEA 99% grade: triethanolamine 99.0% mass min | 102-71-6 | 230 kg HDPE drums |
| Mono Ethanol Amine (MEA) | Industrial Grade (99.5% min) | 99.5 – 100.0% wt (monoethanolamine) | 141-43-5 | Plastic drums, 210 kg net |
Waterproofing and binders
Process stage: waterproofing and surface treatment. Sodium silicate (water glass) is listed on its product page for construction chemicals and concrete waterproofing. Source: product specification sheets, SPC.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Sodium Silicate | Commercial Grade, ratio ~2.0:1 | SiO2:Na2O ratio 1.95–2.10 (by weight); total solids 44–47% mass | 1344-09-8 | Carboys, Road tanker (bulk) |
Coating pigment
Process stage: decorative and industrial coatings. Rutile titanium dioxide is the white pigment for opacity and brightness (general knowledge). Source: product specification sheets, SPC.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Titanium Dioxide (Rutile) | Rutile — KEMOX RC-822 (KMML) | TiO2 content 93.0% min (rutile grade, per KMML COA) | 13463-67-7 | 25 kg bags |
Figures are the grades and specifications we supply, as published on each product page. A batch Certificate of Analysis carries the exact numbers.
85 chemicals for construction
Sodium Gluconate
CAS 527-07-1Acetic Acid
CAS 64-19-7Acid Slurry
CAS 27176-87-0Acid Thickener
Acrylic Acid
CAS 79-10-7Alphox 200
CAS 9016-45-9Benzoic Acid
CAS 65-85-0Boric Acid
CAS 10043-35-3Chromic Acid
CAS 1333-82-0Citric Acid Anhydrous
CAS 77-92-9Citric Acid Monohydrate
CAS 5949-29-1Formic Acid
CAS 64-18-6Fumaric Acid
CAS 110-17-8Hydrochloric Acid (HCL)
CAS 7647-01-0Hydrogen Peroxide
CAS 7722-84-1Nitric Acid
CAS 7697-37-2Oleic Acid
CAS 112-80-1Oxalic Acid
CAS 6153-56-6Phosphoric Acid
CAS 7664-38-2Sulphuric Acid
CAS 7664-93-9AOS (Paste / Liquid / Powder)
CAS 68439-57-6Benzoyl Peroxide Powder (BPP)
CAS 94-36-0Bleaching Powder
CAS 7778-54-3Borax
CAS 1303-96-4Camphor
CAS 76-22-2Caustic Potash
CAS 1310-58-3Caustic Soda
CAS 1310-73-2Ceto Stearyl Alcohol
CAS 67762-27-0Cetyl Alcohol
CAS 36653-82-4CM-1000
EDTA — All Types
CAS 60-00-4Magnesium Nitrate
CAS 13446-18-9Maize Starch
CAS 9005-25-8Melamine
CAS 108-78-1Paraformaldehyde
CAS 30525-89-4SHMP
CAS 10124-56-8SLS Powder
CAS 151-21-3Soda Ash
CAS 497-19-8Sodium Acetate
CAS 6131-90-4Sodium Benzoate
CAS 532-32-1Sodium Bi Sulphate
CAS 7681-38-1Sodium Bi Sulphite
CAS 7631-90-5Sodium Bicarbonate
CAS 144-55-8Sodium Bromate
CAS 7789-38-0Sodium Di Chromate
CAS 10588-01-9Sodium Ligno Sulphonate
CAS 8061-51-6Sodium Meta Bi Sulphite (SMBS)
CAS 7681-57-4Sodium Nitrate
CAS 7631-99-4Sodium Nitrite
CAS 7632-00-0Sodium Silicate
CAS 1344-09-8Sodium Sulphate
CAS 7757-82-6Stearic Acid
CAS 57-11-4STPP
CAS 7758-29-4Titanium Dioxide (Anatase / Rutile)
CAS 13463-67-7Trichloroisocyanuric Acid (TCCA)
CAS 87-90-1Xanthan Gum
CAS 11138-66-2Acetonitrile
CAS 75-05-8Alkyd Resin
CAS 63148-69-6Caustic Soda Lye
CAS 1310-73-2Chloroform
CAS 67-66-3Cocamidopropyl Betaine (CAPB)
CAS 61789-40-0Coco Di — CDEA
CAS 68603-42-9Coco Mono — CMEA
CAS 68140-00-1Common Salt (Sodium Chloride)
CAS 7647-14-5Copper Sulphate
CAS 7758-99-8Di Pentene
CAS 138-86-3Formaldehyde
CAS 50-00-0Light / Heavy Liquid Paraffin (LLP / HLP)
CAS 8012-95-1Linear Alkyl Benzene (LAB)
CAS 67774-74-7Liquor Ammonia
CAS 1336-21-6Mineral Turpentine Oil (MTO)
CAS 8052-41-3Mono Sodium Glutamate (MSG)
CAS 6106-04-3Morpholine
CAS 110-91-8Paraffin Wax (Hard / Light)
CAS 8002-74-2Pine Oil (22% / 32% / 42%)
CAS 8002-09-3Silicone Emulsion / Oil
CAS 63148-62-9SLES Liquid / Paste
CAS 68585-34-2Sorbitol
CAS 50-70-4Thinners
Tween 20 (Polysorbate 20)
CAS 9005-64-5Tween 80 (Polysorbate 80)
CAS 9005-65-6Urea
CAS 57-13-6White Petroleum Jelly
CAS 8009-03-8Sodium Sulphite
CAS 7757-83-7Zinc Oxide
CAS 1314-13-2Frequently Asked Questions
Which chemical is used as a set retarder in concrete admixtures?
Sodium gluconate is listed on our product page as a concrete set retarder and water-reducing admixture raw material, and we supply it: Technical Grade, assay 98.0 - 102.0%, in 25 kg bags, imported from Shandong Fuyang Bio-Tech Co., Ltd. We do not publish dose rates - the dose depends on your cement and mix design and is set by trial batches. The TDS and SDS download from the product page.
Do you supply the raw material for water-reducing (plasticiser) admixtures?
Yes. Sodium ligno sulphonate is the base for concrete water-reducing admixtures; the technical powder grade we supply is specified at dry substance 95% min and active matter 68% min, in 25 kg palletised bags, with each lot supplied against the producer's Certificate of Analysis. Sodium gluconate, a set retarder and water-reducing raw material, is listed alongside it. Both are imported items; quantity and delivery location are taken on the enquiry form, and we quote within 4 working hours.
What chemicals do construction chemical manufacturers buy from SPC?
SPC supplies technical-grade sodium gluconate and sodium ligno sulphonate for concrete admixtures, sodium silicate liquid for waterproofing, triethanolamine and mono ethanol amine for cement grinding aids, melamine, and rutile titanium dioxide for coatings. We are an importer and distributor in Chennai; we do not make construction chemicals.
What is the base for a water-reducing (plasticiser) admixture?
Sodium ligno sulphonate is the base for water-reducing plasticiser admixtures that we supply. The technical powder grade is specified at dry substance 95% min and active matter 68% min; other grades are quoted to their own specification. Packs listed are 25 kg palletised bags and 500 - 1200 kg FIBC bulk bags, with a batch Certificate of Analysis.
Is the sodium gluconate food or pharma grade?
No. Our sodium gluconate is Technical Grade only, intended for concrete admixtures, alkaline cleaning and similar industrial uses. It is not food, pharma or cosmetic grade, and the food-additive designation E576 does not apply to it.
Which chemicals are used as cement grinding aids?
Triethanolamine (TEA) and mono ethanol amine (MEA) are the grinding-aid chemicals we supply; both product pages list cement grinding aids as an application. We list TEA in 85% and 99% grades and MEA as Industrial Grade 99.5% min. Confirm performance in your own mill trials, as we do not specify dosage.
What is sodium silicate used for in construction chemicals?
Sodium silicate (water glass) is listed on its product page for construction chemicals and concrete waterproofing. We supply a commercial liquid grade with SiO2:Na2O ratio about 2.0:1 (1.95 - 2.10 by weight) and total solids 44 - 47% mass, made by GACL or Viswaat Chemicals, in carboys or by road tanker.
How do I order, and what comes with each delivery?
Send quantity, delivery location and application on the enquiry form and we quote within 4 working hours. A batch Certificate of Analysis is supplied with every delivery, and the TDS and SDS download from each product page. We supply from Chennai (head office Periyamet, warehouse Redhills) across South India.
Can the titanium dioxide be used for coatings?
We list a rutile grade, KEMOX RC-822 from KMML, with TiO2 content 93.0% min. Our product page lists decorative and industrial paints and surface and powder coatings as applications. Titanium dioxide is the white opacity pigment; check the grade against your own coating recipe.
Deep guidesSodium gluconate buyer guide: concrete retarder, cleaning, specificationsSodium gluconate in concrete: heat effects and how to run a trial mixSodium ligno sulphonate: technical powder gradeSodium silicate liquid, commercial grade
Sourcing chemicals for construction?
Tell us your requirement — product, quantity, and frequency. We respond within 4 working hours with pricing and availability.