Every role in the formulation, supplied.
Anionic surfactant base
'Process stage: sulphonation and neutralisation. LAB is sulphonated into acid slurry (LABSA), which is neutralised with caustic soda or soda ash into the surfactant salt behind powders, cakes and liquids. SLES, SLS and AOS are ready-to-use anionic surfactants added at the blending stage. Who starts where: runs sulphonation, start from LAB. Neutralises and blends, start from acid slurry. Blends only, start from SLES, SLS or AOS.'
Supplier specification figures from SPC product data sheets; confirm against the batch Certificate of Analysis.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Acid Slurry (LABSA) | LABSA 90% Active | Active matter (as LABSA) 90.0 ± 1.0 % mass | 27176-87-0 | Drums, bulk road tanker |
| Linear Alkyl Benzene (LAB) | Detergent Alkylate, C10–C13 | C10–C13 LAB content 98.0% min; linearity 92% min (mass) | 67774-74-7 | Bulk road tanker, drums |
| SLES Liquid / Paste | Technical Grade (LES 70, 2 mole) | Active Matter (MW 384) 68.0 % mass min | 68585-34-2 | Drums (liquid and paste) |
| SLS Powder | Ginopol 24P-SLS Powder (Godrej Industries Limited) | Active Matter 95.00% min | 151-21-3 | 20 kg PP bags |
| AOS (Paste / Liquid / Powder) | Liquid / Paste (Godrej Alfodet specification basis) | Active matter 38–40% mass (liquid / paste grade) | 68439-57-6 | 50 kg and 230 kg HDPE drums |
Builders, alkalis & sequestrants
'Process stage: neutralisation and water conditioning. Builders bind the calcium and magnesium hardness ions that would otherwise deactivate the surfactant. Caustic soda neutralises acid slurry. Sodium gluconate is a chelating agent for alkaline cleaners; ours is technical grade, for industrial and institutional cleaners, not food or pharma grade. Check form, UN number and hazard class for each product on its product page and SDS.'
Supplier specification figures from SPC product data sheets; confirm against the batch Certificate of Analysis.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| STPP (Sodium Tripolyphosphate) | Technical Grade | 94.0 % mass min (as Na5P3O10); P2O5 57.0 % mass min | 7758-29-4 | 50 kg HDPE/laminated bags |
| SHMP (Sodium Hexametaphosphate) | Technical Grade (P2O5 68% min) | Total phosphate (as P2O5) 68.0% mass min | 10124-56-8 | 50 kg HDPE/laminated bags |
| Caustic Soda | Industrial flakes / pearls / rayon grade | 98% min NaOH | 1310-73-2 | 25 kg / 50 kg HDPE bags, 1000 kg jumbo bags |
| Sodium Gluconate | Technical | 98.0 – 102.0% | 527-07-1 | 25 kg bags |
Foam boosters & co-surfactants
'Process stage: blending and viscosity build. Coconut-derived amides and betaine, with a non-ionic ethoxylate, are added alongside the anionic base to boost and stabilise foam. Foam height and mildness targets vary by product type, so the formulator sets the ratio in trials.'
Supplier specification figures from SPC product data sheets; confirm against the batch Certificate of Analysis.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Cocamidopropyl Betaine (CAPB) | Ginamide B (Godrej) — amphoteric surfactant | Active Betaine 29.0% min | 61789-40-0 | 50 kg HMHDPE carboys |
| Coco Diethanolamide (CDEA) | Ginamide CDEA (Godrej) — liquid foam booster, 1:1 type | Total Active Matter 85% min (mass) | 68603-42-9 | 230 kg HDPE drums |
| Coco Monoethanolamide (CMEA) | Ginamide AI (Godrej) — flake amide | Amide 80.0% min | 68140-00-1 | 25 kg bags |
| Alphox 200 (NPE 9.5) | NPE 9.5 mole, non-ionic surfactant | Cloud point 57.0–60.0 °C (1% solution) | 9016-45-9 | 210 kg HDPE drums |
Thickeners & specialty additives
Finish and viscosity. Acid Thickener builds viscosity in low-pH toilet and bathroom cleaners where ordinary thickeners fail; GMS is insoluble in water but forms emulsions — that is what makes it the emulsifier on this slate. Orthophosphoric acid, technical grade, is also listed here as the mineral acid for cleaning and detergent formulations.
Supplier specification figures from SPC product data sheets; confirm against the batch Certificate of Analysis.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Acid Thickener | INDOCID OA2 (Indo Amines) — Commercial Grade | pH above 7.0 (1% aqueous); specific gravity 0.90 ± 0.1 | — | 45 kg carboys |
| Phosphoric Acid | Orthophosphoric Acid, Technical Grade | 86.0% min Orthophosphoric Acid (H3PO4); 62.3% min P2O5 | 7664-38-2 | 50 kg carboy |
| Glycerol Mono Stearate (GMS) | Technical (powder) | 40–48% monoester content | 31566-31-1 | 25 kg HDPE bags / cartons with PE liner |
Solvents & humectants
Process stage: finishing. Isopropyl alcohol is a fast-evaporating, water-miscible solvent used in cleaners and surface wipes. IPA travels as UN 1219, Class 3 flammable liquid (Packing Group II). Glycerine is a humectant used in hand-wash and soap formulations. Our glycerine is IP (Indian Pharmacopoeia 2022) grade and our IPA is technical grade; confirm grade suitability for your final product with your own regulatory team.
Supplier specification figures from SPC product data sheets; confirm against the batch Certificate of Analysis.
| Product | Grade we supply | Active matter / key spec | CAS | Packaging |
|---|---|---|---|---|
| Isopropyl Alcohol (IPA) | Technical | 99.8% min (GC) | 67-63-0 | 200L MS barrel, 1000L IBC tank, Bulk tanker |
| Glycerine | IP (Indian Pharmacopoeia 2022) | 98.0 - 101.0% (anhydrous basis) | 56-81-5 | 250 kg HDPE drums |
Figures are the grades and specifications we supply, as published on each product page. A batch Certificate of Analysis carries the exact numbers.
85 chemicals for home care
Sodium Gluconate
CAS 527-07-1Acetic Acid
CAS 64-19-7Acid Slurry
CAS 27176-87-0Acid Thickener
Acrylic Acid
CAS 79-10-7Alphox 200
CAS 9016-45-9Benzoic Acid
CAS 65-85-0Boric Acid
CAS 10043-35-3Chromic Acid
CAS 1333-82-0Citric Acid Anhydrous
CAS 77-92-9Citric Acid Monohydrate
CAS 5949-29-1Formic Acid
CAS 64-18-6Fumaric Acid
CAS 110-17-8Hydrochloric Acid (HCL)
CAS 7647-01-0Hydrogen Peroxide
CAS 7722-84-1Nitric Acid
CAS 7697-37-2Oleic Acid
CAS 112-80-1Oxalic Acid
CAS 6153-56-6Phosphoric Acid
CAS 7664-38-2Sulphuric Acid
CAS 7664-93-9AOS (Paste / Liquid / Powder)
CAS 68439-57-6Benzoyl Peroxide Powder (BPP)
CAS 94-36-0Bleaching Powder
CAS 7778-54-3Borax
CAS 1303-96-4Camphor
CAS 76-22-2Caustic Potash
CAS 1310-58-3Caustic Soda
CAS 1310-73-2Ceto Stearyl Alcohol
CAS 67762-27-0Cetyl Alcohol
CAS 36653-82-4CM-1000
EDTA — All Types
CAS 60-00-4Magnesium Nitrate
CAS 13446-18-9Maize Starch
CAS 9005-25-8Melamine
CAS 108-78-1Paraformaldehyde
CAS 30525-89-4SHMP
CAS 10124-56-8SLS Powder
CAS 151-21-3Soda Ash
CAS 497-19-8Sodium Acetate
CAS 6131-90-4Sodium Benzoate
CAS 532-32-1Sodium Bi Sulphate
CAS 7681-38-1Sodium Bi Sulphite
CAS 7631-90-5Sodium Bicarbonate
CAS 144-55-8Sodium Bromate
CAS 7789-38-0Sodium Di Chromate
CAS 10588-01-9Sodium Ligno Sulphonate
CAS 8061-51-6Sodium Meta Bi Sulphite (SMBS)
CAS 7681-57-4Sodium Nitrate
CAS 7631-99-4Sodium Nitrite
CAS 7632-00-0Sodium Silicate
CAS 1344-09-8Sodium Sulphate
CAS 7757-82-6Stearic Acid
CAS 57-11-4STPP
CAS 7758-29-4Titanium Dioxide (Anatase / Rutile)
CAS 13463-67-7Trichloroisocyanuric Acid (TCCA)
CAS 87-90-1Xanthan Gum
CAS 11138-66-2Acetonitrile
CAS 75-05-8Alkyd Resin
CAS 63148-69-6Caustic Soda Lye
CAS 1310-73-2Chloroform
CAS 67-66-3Cocamidopropyl Betaine (CAPB)
CAS 61789-40-0Coco Di — CDEA
CAS 68603-42-9Coco Mono — CMEA
CAS 68140-00-1Common Salt (Sodium Chloride)
CAS 7647-14-5Copper Sulphate
CAS 7758-99-8Di Pentene
CAS 138-86-3Formaldehyde
CAS 50-00-0Light / Heavy Liquid Paraffin (LLP / HLP)
CAS 8012-95-1Linear Alkyl Benzene (LAB)
CAS 67774-74-7Liquor Ammonia
CAS 1336-21-6Mineral Turpentine Oil (MTO)
CAS 8052-41-3Mono Sodium Glutamate (MSG)
CAS 6106-04-3Morpholine
CAS 110-91-8Paraffin Wax (Hard / Light)
CAS 8002-74-2Pine Oil (22% / 32% / 42%)
CAS 8002-09-3Silicone Emulsion / Oil
CAS 63148-62-9SLES Liquid / Paste
CAS 68585-34-2Sorbitol
CAS 50-70-4Thinners
Tween 20 (Polysorbate 20)
CAS 9005-64-5Tween 80 (Polysorbate 80)
CAS 9005-65-6Urea
CAS 57-13-6White Petroleum Jelly
CAS 8009-03-8Sodium Sulphite
CAS 7757-83-7Zinc Oxide
CAS 1314-13-2Frequently Asked Questions
Which chemicals do detergent and home care manufacturers buy from Supreme Petro Chemicals, and how do I get a quote?
We supply chemicals for home care manufacturers: acid slurry (LABSA 90% active), LAB, SLES, SLS powder, AOS, STPP, SHMP, caustic soda, sodium gluconate, CAPB, CDEA, CMEA, acid thickener, phosphoric acid, GMS, plus IPA and glycerine. We are a trader and importer, not a manufacturer of detergents. Send one list through the contact form or WhatsApp and we quote within 4 working hours; a batch Certificate of Analysis is supplied with every delivery.
What is the active matter of your acid slurry (LABSA)?
Our acid slurry grade is LABSA 90% active: active matter (as LABSA) 90.0 +/- 1.0 % mass, free oil 2.0 % mass max, free sulphuric acid 1.5 % mass max. It is a viscous transparent brown liquid supplied in drums and bulk road tanker, UN 2586, Class 8 corrosive.
What is the difference between acid slurry (LABSA) and LAB?
LAB (linear alkyl benzene) is the hydrocarbon feedstock that a sulphonation plant converts into sulphonic acid. Acid slurry is that sulphonic acid, which a detergent maker neutralises with caustic soda or soda ash into the surfactant salt. Our LAB is detergent alkylate C10-C13, 98.0% min, linearity 92% min; our acid slurry is LABSA 90% active.
Do you make detergents or cleaning products?
No. Supreme Petro Chemicals does not make detergents, cleaners, surfactants or any finished home-care product. We supply the raw chemicals to powder, liquid, dishwash, floor and toilet-cleaner manufacturers.
Which Godrej surfactant grades do you list?
Ginopol 24P SLS powder, Ginamide B (CAPB), Ginamide CDEA and Ginamide AI (CMEA flakes), plus AOS liquid/paste at 38-40% active matter to the published specification basis. The exact figures for each grade are in the table above.
What do STPP and SHMP do in a detergent formulation?
Both are phosphate builders. They bind the calcium and magnesium hardness ions in wash water so the anionic surfactant stays active. Our STPP is technical grade, 94.0 % mass min as Na5P3O10, and our SHMP is technical grade with total phosphate as P2O5 68.0% mass min, each in 50 kg HDPE/laminated bags.
Which SLES grade and pack do you list?
We list SLES as a technical grade LES 70 (2 mole) liquid/paste with active matter (MW 384) 68.0 % mass min, supplied in drums. Keep SLES from freezing, which can cause phase separation.
How do I thicken a low-pH toilet or bathroom cleaner?
Ordinary thickeners often fail at low pH. Acid thickener INDOCID OA2 from Indo Amines, commercial grade, is the thickener we list for acid cleaners, supplied in 45 kg carboys. It pairs with phosphoric acid, technical grade, 86.0% min H3PO4, UN 1805 Class 8. Trial the dose in your own base.
Is sodium gluconate suitable for detergents and cleaners?
Sodium gluconate is a chelating agent that stays effective in strongly alkaline cleaning formulations. Ours is technical grade, assay 98.0-102.0%, for industrial and institutional cleaners, supplied in 25 kg bags. It is not a food or pharma grade.
Can you supply glycerine and IPA for hand-wash or cleaner formulations, and what should I know before ordering?
Yes. Our glycerine is IP (Indian Pharmacopoeia 2022) grade, 98.0-101.0% assay, in 250 kg HDPE drums. Our IPA is technical grade, 99.8% min (GC), and travels as UN 1219, Class 3 flammable liquid. Confirm grade suitability for your final product with your own regulatory team, and see each product's SDS for hazard and transport details.
Deep guidesAcid Slurry (LABSA) buyer guideLAB (Linear Alkyl Benzene) buyer guideSodium gluconate (alkaline cleaning chelant) buyer guide
Sourcing chemicals for home care?
Tell us your requirement — product, quantity, and frequency. We respond within 4 working hours with pricing and availability.